Dialed In
Jersey Jack, 2017The one thing I had and have to do on my LE, is cut away that dam mylar over the theater magnet which is crumbling. Now that is cut away I discovered the magnet is lower then the pf so I need to crack the nut and raise it hair, I might go a drop more as to level it with the carbon protector around it.
I have a DI on location and the last three times I’ve been there it’s reset on someone. Yesterday it was during a multiball. Any one encounter this issue and fix it? If this was a WPC game I’d be all over it
Phew! That was a lot of work. 45 mins. 26x SIM multiplier by end of game (which I'm not sure how as I only collected 12 or 13 SIM cards).
On another note, game is still mint and will be up for sale soon (just looking to try something different).
Quoted from mrgregb123:Phew! That was a lot of work. 45 mins. 26x SIM multiplier by end of game (which I'm not sure how as I only collected 12 or 13 SIM cards).
On another note, game is still mint and will be up for sale soon (just looking to try something different).
Holy shit! You do that on default settings?
Quoted from Damien:Holy shit! You do that on default settings?
Yes, except SIM cards carry over ball to ball. Though in this game it wouldn't have mattered - I had D-I-A-L-E-D spelled on ball 1. I just changed that setting last week too, and of course as soon as I change it I'm able to do it w/o needing it carrying over. Previous high was 6.4 million on all default settings.
Was such an efficient game in turns of completing modes and BOB multiballs that after getting Showdown, I had 4 modes left to go for Armageddon. Usually it's the other way around!
Quoted from rai:That’s 50x my high score.
Yeah no kidding.... I think 1.6 million is the grand champ on ours currently.
Quoted from DeathHimself:Yeah no kidding.... I think 1.6 million is the grand champ on ours currently.
I think I'll be able to do a lot better, right now I'm learning the rules. But I have a hard time with the side ramp, not sure if it's my timing or if I need to increase the flipper power or both.
Quoted from rai:I think I'll be able to do a lot better, right now I'm learning the rules. But I have a hard time with the side ramp, not sure if it's my timing or if I need to increase the flipper power or both.
JJP originally had the side flipper power set at like 20 or something. After they realized it was destroying the SIM card hole with hard hit balls, they began lowering it by default to 16 or so. It makes the side ramp but it doesn't blast up it like it does on TAF. Often it barely makes it. If you have the SIM cliffy, crank it up. You're not cheating, it's the way they originally wanted it anyway.
Quoted from mrgregb123:Yes, except SIM cards carry over ball to ball. Though in this game it wouldn't have mattered - I had D-I-A-L-E-D spelled on ball 1. I just changed that setting last week too, and of course as soon as I change it I'm able to do it w/o needing it carrying over. Previous high was 6.4 million on all default settings.
Was such an efficient game in turns of completing modes and BOB multiballs that after getting Showdown, I had 4 modes left to go for Armageddon. Usually it's the other way around!
Howd u collect so many sims but only got threw 8 or so modes?
Quoted from bigd1979:Howd u collect so many sims but only got threw 8 or so modes?
BOB multiballs will award a SIM light if you accomplish the "goal" - I had completed 6 of 7 modes and 2 of 3 BOB multiballs when I spelled D-I-A-L-E-D-I-N.
Quoted from msj2222:BTW, drone is defective. Getting power...if i turn the blades by hand, every once in awhile it perks up for a spin.
This is exactly how TWO of my drones are acting. Are they sending you a new one?
I now also have two LEDs not working properly. Sigh....
Damn. I feel good if I break 500k. Lol. I just turned my magnets to medium and holy carp it's awesome. What does the hard setting make them do?
Quoted from Insanity199:This is exactly how TWO of my drones are acting. Are they sending you a new one?
I now also have two LEDs not working properly. Sigh....
I sent an email. I will update when i hear back
Could somebody with a DI do me a favor? I'd like to know what the measurement is, from the bottom of the cabinet near the back legs to the floor. This way, I could set up my adjustable sawhorse,and use it to hold up the back end of my DI,while I attach the rear legs.
Thanks in advance
Quoted from ralphs007:Could somebody with a DI do me a favor? I'd like to know what the measurement is, from the bottom of the cabinet near the back legs to the floor. This way, I could set up my adjustable sawhorse,and use it to hold up the back end of my DI,while I attach the rear legs.
Thanks in advance
Hip/thigh combo is faster. Live a life of danger!
Quoted from rai:Are you guys moving the Bob sign so you can see it? Where is the link to how to?
+1
Quoted from LTG:New Station 3
LTG : )
You mean OLD station 3 - the original.
Quoted from LTG:25"
LTG : )
Thank you.
Quoted from Nokoro:How do you get the alternate Station 3?
That is the design that was used in the prototype design. Maybe convince someone with a prototype to trade?
Quoted from VidiotGT:That is the design that was used in the prototype design. Maybe convince someone with a prototype to trade?
I was just curious as I didn’t know the history. I like the new design, but both are cool.
Quoted from rai:Are you guys moving the Bob sign so you can see it? Where is the link to how to?
It's not hard to do. Unplug the three connectors on the sign, remove the plastic, drill out the two top rivets, drill two new holes, mount sign with small screws. Zoom in on my pic to see what I did.
Quoted from Lermods:It's not hard to do. Unplug the three connectors on the sign, remove the plastic, drill out the two top rivets, drill two new holes, mount sign with small screws. Zoom in on my pic to see what I did.
I hate to drill holes, wish JJP had caught that during design.
Quoted from rai:I hate to drill holes, wish JJP had caught that during design.
You can’t see the holes when playing. Better to have the holes than not be able to see the sign is how I look at it.
Quoted from rai:I hate to drill holes, wish JJP had caught that during design.
They did catch it which is y it was moved.... its a,ball trap area once u move it but i havent had that happen yet.
Quoted from rai:I hate to drill holes, wish JJP had caught that during design.
remove the sign, bend the two metal hinge brackets to make the uppermost mounting bracket line up on the hole the middle bracket used to be in. No new holes, you'll have a spare screw. If you get a ball trap mock up some clear shield to but behind the sign.
Quoted from ralphs007:It's official,I'm now a member I picked up my game today, and Papapin gave me a hand setting it up.
Congrats! I actually took a little break from mine to play the new games I picked up (LOTR and TWD) and decided to get back to DI today... What a blast to play!
I'm on a mission to get to Showdown!
Quoted from Damien:Congrats! I actually took a little break from mine to play the new games I picked up (LOTR and TWD) and decided to get back to DI today... What a blast to play!
I'm on a mission to get to Showdown!
You’v got quite a great little collection right there.
Quoted from bellbrand:I’m a new member as well. Thanks to Shane from Ayce Gogi
Congratulations !
Looks more like a phablet
</blockquote
yes but hard to answer way back up there, I use a short stick to turn it on and off its looks big in the picture but is like 10" diagonal.
Quoted from rai:I can make the SIM card shot all the time when it’s not lit but will soon drain whatever it’s lit.
At least you get it lit. 
Quoted from gliebig:At least you get it lit.
Crap and then I’ll hit the Big Bang target when nothing is running.
Officially in the club today with a HUO (not for long) DILE. Will be going on route at Token Game Tavern soon (probably taking the place of Hobbit).
Darin
Quoted from tdunbar:Finished custom Cell Phone topper total cost was $22
Looks great!
Quoted from rai:I can make the SIM card shot all the time when it’s not lit but will soon drain whatever it’s lit.
Quoted from rai:Crap and then I’ll hit the Big Bang target when nothing is running.
Pretty much sums up my games.
Quoted from Nokoro:This ball trap has happened to me a number of times now. Has anyone else had this problem, and if so, is there an easy fix?
Not there but just above that on the wire ramp just above the middle rightmost drone above shooter lane (didn’t take a picture) but impossible to shake free.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/dialed-in-owners-and-fans-club/page/87 and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Staten Island, NY
I picked up my game today, and Papapin gave me a hand setting it up.