Ok, The lower right flipper is weak and fails the flipper hold test. The flipper is strong when you first start playing but after a game or so it gets week and fails alot. Everything seems to be connected with no broken solders. All contacts are clean and making connections. could the coil be bad?
Doesn't sound like a bad coil.
I'd go into Tests - Switches - Dedicated , and swing the flipper bat up, see if the EOS closes.
If so then be sure you have a tiny bit of up and down play on the flipper bat so the pawl isn't binding on the nylon bushing below the playfield.
Be sure return spring is good. Coil stop screwed on tight. Plunger assembly moves freely. Coil sleeve isn't cracked, broken, or missing.
LTG : )
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/dialed-in-flipper-problem and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Smithfield, RI