Quoted from eggbert52:

Just spoke to Frank this morning. I am already having issues with my rubber rings splitting and have requested a new rubber kit for the playfield. The rubbers so far are located above the right flipper and below the drones. The out lane post top rubber totally ripped and I can see the rubber below the drones under the plastic piece about to go. I've maybe put 20 games on the machine.
Gonna have to shut her down until I get the new rubber kit.

Quoted from PinMonk:

I'd be surprised if they were not getting it direct instead of buying from a dist.
Titan looks nice, but too dead. White rubber is the right choice for energetic gameplay. But Marco Specialties has the best white rubber I've used, hands down.

Quoted from eggbert52:

I want to order the below for both CCC, Congo, and Dialed In as soon as possible. Whatever the best ones you recommend and thanks so much for your help. I know the Congo ones are black but just took a picture to give you the idea on which ones as I don't know which size that is (5/16? 7/16?). See below and thanks again.

Quoted from eggbert52:

Says it is a 3/18. Manual is totally wrong, I'll let LG know so they can have Jack fix it hopefully before they start printing manuals.

Quoted from PinMonk:

I'd be surprised if they were not getting it direct instead of buying from a dist.

Quoted from Bud:

Finally got my DI! I still think I should have went with the standard but I just couldn't wait. I didn't think I wanted to spend the extra for basically just a lighted ramp, shaker powder coat and glass. After seeing it though I'm glad I didn't hold out. Really is a different pin from TH and WoZ. I was surprised to not see the bottom of the cabinet filled up!

Quoted from DeeGor:

Not a big deal, but the bubble level was installed backwards.

Quoted from PinMonk:

Is it on upside down or backwards left to right? The point in the center should be above his head. Here's a pic. Notice how it's not the same on both sides, so orientation matters.

Quoted from ngg:

this is how it sits currently when qed guy slides right

Quoted from woody76:

I just ordered some thicker leg protectors to put on mine. I can see that if I let it go I could have some issues down the road possibly. I would assume JJP will add thicker protectors moving forward.