Quoted from TheLaw:nice feature but we can't have that can we!
She's a testy bugger I'll give her that much; trapdoor just refuses to go down. Maybe I need some better grease because zoom spout isn't doing anything.
I've coated it, exercized it a couple hundred times, taken the entire mech off, coil out, make sure the springs are springy , positioned, re oil, re worked, re tested....nada. I'll give her a couple hours to think aboot what she's done and then try again i guess.
Here's what to check on the trap door. Mine was also getting stuck so I noticed the spring on the coil plunger was on backwards. The end of the spring was not coming over the coil sleeve but was at the top of the sleeve. I guess the little fiction it caused against the plunger was keeping the door from dropping. All I did was turn the spring around and made sure the spring come over the lip of the coil sleeve. It has worked ever since. Hope that helps.