Quoted from n4297m:After the recent discussion on clearcoat chipping near the sim card hole I looked at my machine and sure enough I have a semi-circular chip on the sim card hole edge closest to the backbox that took some of the artwork silk screening with it that is about 1/4" in radius just to the right of the post. I put a ticket into tech support. Has anyone heard from JJP on when they may be shipping the protectors? I was going to put a little finishing epoxy that I use on my R/C sailplanes to seal the upper edge of the hole, but figured I would instead wait until I heard from JJP. I stopped playing the machine as the edge with the chip is ragged and I can't tell if there may be further delamination so I'm afraid of the damage getting worse until it is sealed down or protected from above.
Can you post a pic of this?