Hey guys, my DI LE arrived today. Great looking pin and a really fun game all around.

After about 20 games, I notice a bunch of my lower pf insert LEDs weren't lighting up.

When I went into the test menu for all LEDs/flashers, the same lower LEDs didn't function, ie: none of the lower laser beam LEDs lit and a number of the other lower pf inserts stayed dark.

I'm not overly tech savvy and any suggestions would be appreciated.
Thanks!

Vireland, Lloyd had also just emailed suggesting I check the connectors. Thanks for the tip.
I will do this tomorrow once I download the manual.
Regarding your advice above, I'm not much of a pin tech, where is the computer box located? (Ie: under the pf or behind the back glass?)
Appreciate the assistance.

Thanks Vireland and Bigd, I will start with the boards under the pf (as easier to access) and check behind the backbox if I can't locate any loose connectors.

Regardless of this small issue, my family are all loving the game. It's our first JJP purchase. All shots are very smooth and the pin plays & looks awesome.

Quick follow up on this: sure enough, there were a few loose connectors and once re-seated, every led works perfectly.
Thanks to each of you for the suggestions- it was much appreciated.
Looking forward to getting some serious time on this pin.
So far, really enjoying the smooth flow, interactive toys and the fun rules.
No doubt the pin looks beautiful- really great job by Lawlor and JJP.

Question for DI owners: I have all 3 of my flippers turned up to maximum 25 strength.
They still seem a bit on the weak side- not as 'snappy' in comparison to my Stern titles or my B/W pins.
Have others done anything to increase their strength?
In the settings menu, the flipper setting strength does go up to 32; which I'm hoping JJP will code in later.
Now in saying this, all the shots are typically hittable and my family are loving the game.

Bigd, do you recommend anything? It's not that I can't make the shots but the flippers don't feel nearly as strong as my other pins do.
I would say the upper flipper is the strongest of the 3.
My pf angle is set currently at 6.5.
Perhaps that's just the way it is; and I was just looking to confirm either way.

I wonder if a flipper re-build would help; or if JJP will consider increasing the flipper strength up to 32 as they already have this built into their settings menu?

Any thoughts on putting in stronger flipper coils? Could this be a viable option?

I can still hit all the shots- with the left loop loop to upper flipper being the toughest for sure.

Yeah, I don't see any hangs-up on the left orbit; just a bit of overall flipper weakness. Perhaps more so on the right flipper.
Guess a flipper rebuild might be the way to go.
I'm going to play it a ton more just to see if things improve first.