Demolition Man
Williams, 1994So I played this game and it was great loaded it and brought it home and before testing again at home I installed complete set of adult roms and game rom. Went to power on and won’t boot, I reseated connectors here are the lights that won’t come on, anyone know what or if it could be a fuse and which one. Wpc board see pictures for lights on- no boot no GI only light on dmd
Put the chips you took out back in and see if they work before assuming a fuse blew.
Always reverse what changed before investigating farther.
Quoted from PunishersLEMC:Went to power on and won’t boot, I reseated connectors here are the lights that won’t come on, anyone know what or if it could be a fuse and which one. Wpc board see pictures for lights on- no boot no GI only light on dmd
The power light (D21) is lit so you have 5V to the board, the CPU board only needs +5V to boot so fuses are not going to be an issue here. Its a best practice to never press chips into these type sockets with the board installed in the machine as the board is not designed to flex, its always best to install these with the board sitting on a hard surface.
I would pull both boards you installed chips in and verify no pins are bent over and pressed against the underside of the IC.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/demolition-man-wont-boot-led-not-on and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Monroe Township, NJ