You're currently viewing posts by Pinsider supermoot.
Click here to go back to viewing the entire thread.
HI NATE! WELCOME (it's matt from vault) I would just do the coil sleeve on the launch for starters. Coils either work or don't, they dont usually become weak. You can get individual l/r flipper rebuild kits from pinball life when you have an odd number of flippers like demo man.
Quoted from uncle_jose:Hey guys!
Question, I'm shopping a DM with new plastics and I have a plastic which I cannot find where it belongs, any guidance will be greatly appreciated.
Thanks!
~ja
I think it goes in the very back on top of the back plastics underneath the ramp. It's vertical and riveted in. My memory is not the most reliable thing.
Quoted from supermoot:I think it goes in the very back on top of the back plastics underneath the ramp. It's vertical and riveted in. My memory is not the most reliable thing.
I can't find a pic of it, I may be confused with sttng.
Mantis has a replacement if it goes sideways. https://mantispinball.com/product/demolition-man-scoop/
It's probably connectors. Maybe have a local tech come help? https://www.pinwiki.com/wiki/index.php?title=Williams_WPC#Game_resets
Quoted from mrossman5:Happy to join the club! On my machine, the autolaunch is not cleanly feeding the upper left flipper. Sometimes it gets hung up and makes it and other times it gets completely hung up and goes down the lanes. What should I adjust?
Make sure it the machine is level as well.
You're currently viewing posts by Pinsider supermoot.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/demolition-man-owners-club-members-only?tu=supermoot and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.