Edmonton, AB
That's the way mine is set up, but I need all the help I can get.
(Topic ID: 31302)
Linked Games
Demolition Man
Williams, 1994
Topic Gallery
You're currently viewing posts by Pinsider smiley.
Click here to go back to viewing the entire thread.
9 months later
Quoted from Turkey_Robinson:Hi everybody! I have a quick question here.
I need to replace the female connector at J120.
Is this the part I would need?
http://www.marcospecialties.com/pinball-parts/5792-10847-11
If not, could someone point me in the right direction? I'm having trouble finding it.
Thanks,
Josh
Yes that is correct. I buy these 12 pin and just cut off to the number of pins required, cheaper too.
http://www.marcospecialties.com/pinball-parts/5792-10847-12
you might want to buy this tool as well, but i have had success with a small screwdiver to push in the wires.
http://www.marcospecialties.com/pinball-parts/77-IDC156
10 months later
2 months later
Quoted from hockeymag8:Hi - I bought the home swear ROMs
https://www.amazon.com/Stainless-Steel-Insulated-Vinyl-Puller/dp/B0002JEZ2I/ref=pd_lpo_236_lp_img_4
You can use a small flat tip screwdriver but the chip puller is much better.
Make sure the game is off.
Make note of the semi circle indent on the old chip. the new one must be put in the same way.
Pry slowly on either side of the chip you are removing. Make sure you are prying between chip and socket. Pull straight out.
Place the new chip so one side the legs on side are aligned. Gently push the chip in making sure the legs line up.
You will lose all settings and need to put in the time and date, set free play and any other changes you want.
A2-26 vulgar speech must be turned on. You can turn it off when you don't want to offend anyone.
Quoted from hockeymag8:Got Sound!
I am glad you are up and running.
5 months later
Quoted from cocomonkeh:Balls seem to get trapped under the right sling plastic.
do you have the right size rubber? one size too big would allow that.
3 weeks later
Quoted from mymalibu:part number for the trough protector
Marco has it too.
4 months later
8 months later
Quoted from allsportdvd:swear roms
I got mine from pinsider ASTILL.
1 year later
Quoted from Borntolose:profanity ROMs
go to menu, I believe A2 there is a "vulgar speech" set to off. no need to change ROMs
Quoted from Borntolose:Just turned it to off.. still says FREE ONLY. even when I set it to free play!
Pricing is in A3, that's where you turn off free play and set it to the coins you want.
3 months later
Quoted from Frax:Is there someplace I can get the curse home roms?
I get all my rom's from ASTILL on here also goes by rompingirl on ebay.
11 months later
Promoted items from Pinside Marketplace and Pinside Shops!
Monroe Township, NJ
You're currently viewing posts by Pinsider smiley.
Click here to go back to viewing the entire thread.
Reply
Wanna join the discussion? Please sign in to reply to this topic.
Hey there! Welcome to Pinside!
Donate to PinsideGreat to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
