I need some help from community here.Asking for help for a week and I do everything that I can,I'm not lazy man,but still no one respond me with some idea:
https://pinside.com/pinball/forum/topic/demolition-man-claw-problem-1

And I pleased you for give me some info for this situation:

Before the claw catch the ball it move nice and quiet,but when it catch the ball I can hear that when the claw move did it little slower than when it's without the ball and much louder,like it's hard to move.And when it's on position with the ball no matter on which mode(not move) I can here some strange snore from the mechanism and can fell little vibration.
When I test it in TEST MENU it move nice even with the ball.
I doubt this must be normal so please again confirm how work your machine.I know that the magnet must have some noise because it work when catch the ball,but this cannot be from it,it's too small to make noise like this.

The flipper parts are ok,but you need stronger coil FL-11629.
FL-11630 that you marked is weak.
Also check if your Flipper controller board is very well secured on the metal plate.

Yes,for it is 11630.
Buy and new coils for the main flippers.
I have experience with old one even they look and measure ok to be problematic.

You can get +12v from the each of the flipper boards or from the coindoor board.

Which type you bought?
Can you give a link?