Is there enough blue GI? Maybe camera lies, but it looks in that picture way too much bluish for me...
Quoted from Edenecho:
Hi fellow demolition.... men!
A question regarding ROMS:
Our DM has CPU PX-5, sound L-2 eproms.
We suspect that this cpu rom version is outdated, due to the following:
1. There is no ball save on car crash (which is a setting, to enable it, but dont work)
2. When in MB and super jackpot is lit and right ramp hit, it does not give a superjackpot but instead start a mode.
So in theory it works in its own way, that you get modes easier instead of superjackpot, but its not the way its supposed to be. A tech looked it over and nothing wrong with switches apparently.
Does anyone know something about this? And also, where to buy the newest functioning CPU eprom and also the swear sound roms?
If i remember it right PX-5 should have car crash ball save, but those multiballs were weird and especially lack of Demolition Jackpot. Check revision history and i give my recommends to profanity roms. (http://www.planetarypinball.com/mm5/Williams/tech/roms/demoman.html)
I bought mine from Ministry of Pinball.
That eyeball is hard to find. You can restore it.
....or buy it from from Florida.
Gently force it to move right. Put it in test mode and move Claw in middle and move it with your hand to right just a little bit. If it still complains about being out of range then move it little more. You can feel little resistance when the gears are moving.
Check if this fits for you.
Quoted from Gogojohnnyquack:
Captive Eyeball - I have scoured all of the interwebs I can find for a new floating eyeball of the correct 1-1/16" diameter with no luck. Anyone have any ideas or leads? I've read the Pinball Rebel ordeal of reconditioning one, and that's not going to happen. Ideas?
...I have same problem but not willing to pay 40$ posts to get 8$ toy
Can someone from DemoClub bring me one eye from US when coming to Finland
Quoted from Lawnboy:
Can someone please look at there machine and see where this wire goes too? Its the switch that the nut driver is pointing too on top if that helps. Thanks in advance.
I think it has come off from the yellow stand-up-target below. In my game the wire is brown, but hope this picture helps.
I have done GI socket and bulb to that hole. Twin bendie to light eye-lane with pink, highlights red veins, and ice blue to car-tunnel. Looks and works nicely.
Great to see you're enjoying Pinside! Did you know Pinside is able to run thanks to donations from our visitors? Please donate to Pinside, support the site and get anext to your username to show for it! Donate to Pinside