New proud owner here! Does anyone make the plastic ramps? Mine are all in need of replacement!
You're currently viewing posts by Pinsider Antennaejim.
Click here to go back to viewing the entire thread.
Anybody know where I can get the left handle inside metal flat spring? Part number A-18001-2
I just replaced my trigger buttons with the new red aluminum ones on here and found that I’m missing the spring. I love the new trigger buttons! Thanks in advance!
Quoted from Antennaejim:Anybody know where I can get the left handle inside metal flat spring? Part number A-18001-2
I just replaced my trigger buttons with the new red aluminum ones on here and found that I’m missing the spring. I love the new trigger buttons! Thanks in advance!
Quoted from nerdygrrl:That part number is not coming up anywhere. I would take the one out of the right side, measure and head down to your local hardware store. My guess is you'll find one close enough. You can always check the big williams books that they have posted on PPS, it may be there under a diff part number.
I could get a flat blade spring at the hardware store?
Yep that’s the part 10-460.1 thank you! I did research online and that part seems to be out of stock everywhere I look. Figures, just my luck stuck again
Quoted from nerdygrrl:I don't think it's all that unique though. If it's just the brass leaf switch, measure and then either head to your local hardware store, compare size to other available leaf switches or make your own using the other you have as a trace. I am sure the steel sheeting that is used for ramps flaps and is easily had is a fine alternative for time being.
Since you have the part number call Steve at Pinball resource. Tell him you have this DM, this is the part number, but you can't find it anywhere. If you give him the measurements he maybe able to source an alternative. If I wasn't elbow deep in full shops on my DM and SST I would take my handle apart and look for you.
Mine is not brass. Looks to be a harder metal maybe stainless? I have taken mine apart and can confirm this. I will try steve. It’s definarely not a standard size leaf. It’s also pretty narrow.
Quoted from gweempose:Does this kit contain what you need?
https://www.pinballspareparts.com.au/parts-by-machine/williams-parts/demolition-man/a-18762-2-p.html
Yes it does. But $22 for the kit and $20 shipping to US for a $1.80 part ouch!!!!!!! Anywhere in the US still carry these? this is ridiculous!
Quoted from gweempose:Does this kit contain what you need?
https://www.pinballspareparts.com.au/parts-by-machine/williams-parts/demolition-man/a-18762-2-p.html
Yes and thank you Marco also has it!
Quoted from greeny:Hi, can you point me in the direction to get the aluminium triggers?
Contact
robd222
You're currently viewing posts by Pinsider Antennaejim.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/demolition-man-owners-club-members-only?tu=Antennaejim and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.