Demolition Man
Williams, 1994Ok my quest for all clear when off and blue when on continues. eBay 1/32” discs that are 7/8” diameter are almost a perfect fit. I had to sand around the edge until it fit inside the cover. I used rub on transfers for the lettering. Put Mylar over the top to keep the letters from falling off.
69B36E4C-E01A-4C28-BCA5-29BD829A4F4F (resized).jpegAAE748C7-A00B-45C1-A968-E4AD1A09B56E (resized).jpegB550354D-06CB-442D-ACB3-04AD3DDDBD64 (resized).jpegGreenMachine19 I love what yo've done so far. That machine looks so clean and slick.
Welded it in and rewelded the factory crap welds.
74B344C4-1701-4073-A5F0-C959D58C4940 (resized).jpegA6D3F8AB-2983-4987-8717-B8034DA679D2 (resized).jpeg1AF9CE29-839C-4DF7-B12A-5B7A686D387B (resized).jpeg4E8D5D12-4851-4AE8-BE92-FC5FC2D13635 (resized).jpegFA7F5DF4-2FFE-4E05-9056-7F3F519A8154 (resized).jpegF48ED43E-AAE0-4785-8158-AF42E708B83B (resized).jpegC34047C2-8C02-40E8-BAC8-774528782982 (resized).jpegI would love to know " The rest of the story " behind these scoops . It looks to me like the fab shop that made them had all the pieces just tacked up to be welded . Then they were shipped before they were fully welded . If they were anywhere else other than 3" from the flipper they might of held up better. Mine had to be Tig welded also !
Quoted from TenaciousT:I would love to know " The rest of the story " behind these scoops . It looks to me like the fab shop that made them had all the pieces just tacked up to be welded . Then they were shipped before they were fully welded . If they were anywhere else other than 3" from the flipper they might of held up better. Mine had to be Tig welded also !
Barely tacked at all. looks unfinished.
Does Great Lakes Modular still sell the revised claw opto boards? My claw is still... twitchy even after the connector fix. I want to replace, and then if it still doesn't work, replace the motor board under the playfield. The motor board is in stock in a few places, but the opto board? Friggin NOWHERE.
Quoted from djxealot:Does Great Lakes Modular still sell the revised claw opto boards? My claw is still... twitchy even after the connector fix. I want to replace, and then if it still doesn't work, replace the motor board under the playfield. The motor board is in stock in a few places, but the opto board? Friggin NOWHERE.
GLM is out of business. Tony admitted the site is up but no one can buy anything. A real tease. 
Quoted from underlord:GLM is out of business. Tony admitted the site is up but no one can buy anything. A real tease.
Oh wow! This is the first I'm hearing of this. That sucks.
Quoted from zacaj:Did anyone else even ever make them?
It's a pretty simple board. Besides from replacing the optos and header, not much can really be done...
Suppose I could buy the optos, resistors, header, and diodes and replace EVERY component, see if that works.
PITA though. Paying $25 and getting a new board would have been much easier.
Quoted from GreenMachine19:Stock plunger reads “Launch Ball”. Someone at some point put what I think is a Data East “Start” button. I don’t really like either. Anyone have any ideas what I should put that fits the theme? Murder Death Kill? Freeze?
[quoted image]
187 MDK
That looks awesome GreenMachine!
On an unrelated note: I have a pair of blue halo buttons to install that I got from a fellow Pinsider. They have resistors for the leds to power up from 12v at coin door board. Which way on resistors? I’m sure polarity matters.
1E4F2721-758D-45D6-938D-02BD0C68C31E (resized).jpeg3F713523-550C-43D2-84F5-116791BFA6C1 (resized).jpegQuoted from GreenMachine19:Like this
[quoted image]
Love to see more pics when you open up the handle and install.
Quoted from GreenMachine19:Not mine but this mod is explained in detail in this thread. Just type "buttons" in the search bar of this thread and you will see how to do the whole mod. Its being done by small children so you can see that its not that hard.
[quoted image]
Here it is.
https://pinside.com/pinball/forum/topic/demolition-man-owners-club-members-only/page/19#post-4251407
Those kids look too mature!
You know what’s funny, I searched through this thread page by page and never found those. Must of been skimming through too fast by page 19. 
Thank you once again gang for putting my helmet back on before sending me out. 
Quoted from underlord:Those kids look too mature!
You know what’s funny, I searched through this thread page by page and never found those. Must of been skimming through too fast by page 19.
Thank you once again gang for putting my helmet back on before sending me out.
I have an extra pair of the red LED angel eye elevated buttons that I didn't use. PM me if interested. I did them in blue and never got to put the red in before selling my DM. Yes, I miss it. 
Quoted from dawasa:Does anyone have an alternate translite they would like to sell? If so, please PM me?
[quoted image]
I second the motion! I really like the “original” version that got vetoed by Wesley Snipes that they used for the DM on steroids. Would like to get my hands on one of those.
Quoted from waldo34:Me three
What does that one look like?
Quoted from Langless28:What does that one look like?
Spent sometime looking for it starting to wonder if all I have seen is the alternatives. Closest post I found was this one
Quoted from Soulrider911:Hey fellow Demo Man owners I am considering picking up a nice DM locally, but would like any tips for specific mechanical issues/areas to look at. I know the arm is notorious for having problems? Thank you for and insight.
cryo claw opto issues is the most common one i see. scoop damage or repair done correctly i am sure more will chime in that is what i am aware of
Quoted from Soulrider911:Hey fellow Demo Man owners I am considering picking up a nice DM locally, but would like any tips for specific mechanical issues/areas to look at. I know the arm is notorious for having problems? Thank you for and insight.
when I first got mine had severe wear on outer loop where ball lands after shooting , and up around the " jackpot" hole .repeating bounce had minced the plywood to a foam like feel . had to grind 2 ply thickness to get back to solid wood .bog , paint ans 2pac clear , you wouldn't know if I didn't tell you . I think it payed for itself previously!!!!! 
Thanks Guys, so wear will be a non-issue on this machine... I mean its probably the cleanest one i have ever seen. A Co-Worker has owned it for like 8 years, I he says that its never been routed, and I believe it. Thank you for the input
IMG_20190415_193400 (resized).jpgIMG_20190415_193408 (resized).jpgIMG_20190415_193555 (resized).jpgWanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/demolition-man-owners-club-members-only/page/28?hl=viperjelly and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Groton, CT
Toronto, ON
Raleigh