The flippers on my demo man started to act up last night.
here is the problem when holding the right flipper in the up position the bottom left flipper won't fire.
if i hold the left flipper the right flipper fires fine.
if you hold the left flipper too long it blows the fuse.
i suspect either a EOS issue or a wiring problem, as I recently put two new coils in the bottom flippers, I did buy the proper coil for the flippers.
in the solenoid test the coils are fine except in the hold test. they do nothing

could it be a wiring problem to the coil?
does someone have a pic of how these are supposed to be wired?
I do not have a manual.
any advice or help is appreciated

yes it started when i changed the coils,