Well friends, I don’t know how else to put it. I put two new flipper coils from Marco into my Demolition man and now the flippers automatically raise as soon as power is applied to the machine. You heard that right, as soon as you power on the machine the flippers go to the cradle position. The top left flipper ask as it should. I pulled the fliptronics board and tried it in another Williams machine and it works fine in Fishtails but when I plug my demolition man back together , The flippers automatically raise and you can push them down manually they pop right back up. When I first ordered the coils from Marco they had bad diode‘s according to Marco so they sent me new diodes I replaced them and that’s when the problem began. I’ve used an ohm meter to check the tabs and everything looks to be in spec. I have tried putting the old coils in and they also cause the flipper to elevate. Any help would be greatly appreciated.