I'm installing some new flippers on my Demo Man pin. I just installed the upper left flipper and I noticed something slightly different about the rest of the lower flipper tests. On the "Flip Power" All flippers move as expected. On the "Flip Hold" part of the test, the lowers "click" and do not move. The UL flipper, however, slowly moves, granted not with nearly as much force as the "power" test, but it still moves fully out and then back in to the parked position. Is this normal, or does it indicate a problem? I soldered the wires the same way as the previous one. Here is a video of the test;
https://drive.google.com/open?id=0B-Mu6P7kNjsOcE9jeGRvV0paQ0U