Quoted from jardine:I've checked the wires of the coil with no issues, even put my dmm to continuity test and got a reading.
How many ohms did it measure? I think it should be about 5 ohms.
Can you check to be sure you have voltage to the coil? Lift the playfield. Wedge your black meter lead between the ground braid wire and the bottom cabinet so you don't have to hold it. With the red meter lead, what VDC do you measure on each of the two coil lugs? You should see about 50VDC on each coil lug.
If you don't have 50VDC to either coil lug, then you have a break in the power wire that feeds from another coil with the same thick gage wire.
Mattawan, MI
