It's funny how everyone says how brutal f14 is. Don't get me wrong, it's wicked fast but to me it so forgiving. I rolled it on 5 balls (I know! ) got 11 million. Great game though!!!!
You're currently viewing posts by Pinsider superbee.
Click here to go back to viewing the entire thread.
It's funny how everyone says how brutal f14 is. Don't get me wrong, it's wicked fast but to me it so forgiving. I rolled it on 5 balls (I know! ) got 11 million. Great game though!!!!
Quoted from vid1900:5 balls??????
Ahahahahahahahahahahaha You can't win.
Ok, that was just mean ! Lol
Pinball,pinball tools,pinball repair,pinball restore,pinball rivets,pinball restoration Tools
Home PageSuppliesBrushesPolishing KitsPaint PensHardwareRivetingGift CertificatesAbout UsContact UsSite MapLinksDisclaimerShippingElectronics
Here are some specialized tools that will aid in your restoration projects.
ndset.jpg
Great Neck 7-Piece Nut Driver Set
These nut drivers are good quality and a great value. Hollow shaft to accommodate protruding screw threads. Bright color-coded handles so you can tell at a glance what size they are. Chrome-vanadium steel for long service. These are all commonly used sizes for pinball repair: 3/16" Black, 1/4" Red, 5/16" Yellow, 11/32" Green, 3/8" Blue, 7/16" Brown and 1/2" Red. 7" long overall.
$16.00 per set of 7
wiha18nd.jpg
Wiha 1/8" Nut Driver
This is a very small nut driver suitable for the 2-56 thread screws used in switch stacks and other small mechanisms. Deep well socket head will accommodate about 3/4" thread protrusion. Made in Germany by Wiha. 6" long overall.
$8.50 each
kleinnds1.jpg
Klein Magnetic Nut Drivers
These nut drivers are very handy. Hollow shaft to accommodate protruding screw threads. Magnetic insert has a hollow center that allows their use on lock nuts. Chrome-vanadium steel for long service. Available in 2 sizes, 1/4" and 5/16". 6" shafts, 10" long overall.
$16.50 each
Size
jewelerset.jpg
Jeweler's Screwdriver Set
This is a nice set of 6 fine bladed mini screwdrivers. Slotted sizes 2mm x 3", 3mm x 4", 4mm x 6" and Phillips sizes #00 x 3", #0 x 4", #1 x 6". Hardened and tempered carbon steel blades, molded plastic handles, color coded. Handy for fine work.
$4.50 each
2n1shorty.jpg
Stubby 2-in-1 Screwdriver
This is a great 2-way stubby screwdriver. The reversible bit gives you a 1/4" flat blade and a #2 phillips blade. Small with a broad grip for tight spots. 3.1" long overall.
$1.50 each
ratchetbits.jpg
Mini Ratcheting Bit Set
This is a handy little set of a ratcheting bit holder and a set of screwdriver bits. Gets into tight spaces with 3 Phillips bits, #1, #2, and #3. 2 flat blade screwdriver bits in 3/16" and 1/4". 4 Torx bits in T10, T15, T20 and T25. Plus, the ratchet will accept any 1/4" hex drive bits you have already. Reversible ratchet and 9 bits with holder, 4" long overall.
$9.00 each
shefutil.jpg
shefopen.jpg
Folding Lockback Utility Knife
This is one of those tools that I bought for my own use and it has stood the test of time. Super handy and always ready, I use it every day, mostly because a fresh, sharp blade is just seconds away. It's a high-quality Sheffield folding lockback utility knife with quick change blade lock system and blade storage in the handle. It has a rubberized handle for good grip with a belt clip on the back and a rubber thumb pad for applying downward pressure. Uses standard utility knife blades, it comes with one blade loaded and 5 spares in the handle. Includes a lifetime warranty from Sheffield Tools.
$12.50 each
utilblades.jpg
utilblades5.jpg
Utility Blades
Standard utility knife blades in two package sizes. A pack of 50 in a plastic dispenser, or a pack of 5 on a card. Fits most utility knives including the one we sell above. Dispenser also has a compartment for storing used blades safely.
$5.00 per pack of 50 blades
$1.25 per pack of 5 blades
Size
snips1.jpg
Tin Snips
These are an easy way to cut blue spring steel for ramp flaps. Drop-forged steel, hardened and polshed. 10" long overall.
$9.50 each
diag7.jpg
Diagonal Cutters 7"
These are great for cutting Piano Wire, screws up to 10-32, springs and many other tough to cut things. 7" overall with double thick grips. Made of chrome-nickel steel. Limited lifetime warranty from Great Neck Tools. Tip: When cutting screws, first thread a nut on the screw above where you're going to cut. Cut the screw to length. Then, as you remove the nut, it will straighten out the cut threads as it comes off the screw.
$9.75 each
dmm1.jpg
Digital Multimeter
This is a 5" digital multimeter. Ranges for AC Volts, DC Volts, DC Amps, Ohms, and Transistor test. Includes battery and 12" leads.
$7.50 each
solderingiron.jpg Soldering Iron 30 Watt
This is a 30 watt soldering iron, ideal for general pinball repairs. Has a rugged plasic handle and a replaceable pointed tip. UL listed, 120V with 5' cord.
$5.00 each
scalpel&blades.jpg
Scalpel Handle & 5 Blades
These are awesome hobby knives! VERY SHARP and the blades won't come loose. Flat sides means they won't roll away. Handles are stainless steel and blades are sterile surgical steel. Better than an Xacto knife for fine work. You get one #3 scalpel handle and five #11 surgical blades.
$3.50 per set
surgicalblades.jpg
Scalpel Blades pack of 10
Scalpels make awesome hobby knives! VERY SHARP and the blades won't come loose. Here is a pack of 10 #11 blades in sterile surgical steel. These fit our scalpel handle or any #3 scalpel handle.
$2.50 per pack of 10 blades
razorblades1.jpg
razorblades100.jpg
Single Edged Razor Blades
These are heavy-duty #9 single edged razor blades. Quality blades, made in the USA and heavier gauge than many imported blades I've seen.
$1.00 per pack of 10 blades
$7.50 per pack of 100 blades
idc100.jpg
IDC Punchdown Tools
These tools are the correct way to reseat wire in the IDC (insulation displacement connector) plugs that are commonly used in solid-state pins. You may get years more service from a reseated wire, or you might just use these as a troubleshooting aid, verifying where the wiring problem is before making further repairs. Made of a tough nylon composite. Available in 2 sizes: .100" and .156"
$15.00 each
Sizes
14sockets.jpg
Great Neck 1/4" Drive Socket Set 20 pc.
Great Neck 20 Piece 1/4" Drive Deep Socket Set. 6 Point regular and deep wall. Chrome vanadium steel construction. Includes socket storage tray. Includes sizes: 3/16", 1/4", 9/32", 5/16", 11/32", 3/8", 7/16", 1/2", 9/16" all in both regular and deep. Great Neck sockets feature Posi-grip No Slip design. The socket wall design provides superior gripping power without rounding the fastener points. Torque is applied to the walls of the fastener head. Lifetime warranty from Great Neck Tools.
$12.50 each
OUT OF STOCK
Img116.jpg
Pin Extractors for Round Connector Pins
These Pin Extractors are the best tool available for removing the round Molex-style pins from their plastic housings. The larger one on the left is for .093" pins. The smaller one on the right is for .062" pins. Colors may vary from those shown.
$16.00 each
Size
Img117.jpg
Open Barrel Crimpers
These spring-loaded open barrel crimpers are a great value. They have precision ground dual level jaws to make both the wire and insulation crimps at once. Well made and easy to use. I have made excellent crimps on every open barrel pin I can find, Molex, Amp, .062 to .200. Eight inches long with hardened steel jaws, plastic handles and a jaw lock. The pivot is a threaded hex socket screw so the joint can be kept nice and tight. Wire cutters at the tip.
$26.00 each
pliersset.jpg
Mini Pliers Set 4 pc.
This is a set of 4 drop-forged mini pliers. Set includes Long Nose, End Cutting, Diagonal Cutters, and Needle Nose. Comes with embroidered nylon rollup case.
$10.00 each
Img67.jpg
Air-Powered Stapler for Ground Braid
This air-powered stapler fires the exact size and type of staples that Williams used to attach ground braid and documents to the inside of pinball cabinets. Makes short work of a re-grounding project. Also powerful enough for lightbox rewiring and under-playfield wire stapling. Uses the bright silver or the copper color staples sold below, staples are not included. This long-nose version is great for getting into tight spots like pop bumper leads and under playfield wiring. Requires a compressor with a storage tank delivering at least 60 PSI at .36 CFM.
$95.00 each
Img119.jpg
Staples for the Air Stapler - Copper Color
These copper colored staples are shown on the left in the picture. These staples are the type used by Williams on many modern pins to attach ground braid and documents to the inside of pinball cabinets. Each box has 10,000 copper staples.
$10.00 each
Img119.jpg
Staples for the Air Stapler - Silver Color
These silver colored staples are the same type used on many modern pins to attach ground braid and documents to the inside of pinball cabinets. Shown on the right in the picture. Each box has 10,000 silver staples.
$7.50 each
Img279.jpg Staple Lifter
This tool makes easy work of removing staples from old ground braid. Does a clean job without gouging your cabinet. Made of steel with a comfortable plastic handle.
$16.00 each
flexstones.jpg
Flexstone Switch Contact Files
These flexible files are great for cleaning contact switch points. They are available in Medium grit (120) and Coarse grit (80).
$3.50 each
Grit
pointfile5.jpg
Ignition Point File
This small steel file handles the heavy-duty point reconditioning needed when working with high current switch points. Typical applications are older flipper button switches and flipper end-of-stroke switches. Do not use on the small, gold colored contact points.
$1.00 each
fileset.jpg
Needle File Set 6 pc.
This 6-piece needle file set is great for fine work. Includes round, half round, square, triangular, flat square and flat pointed files. Each has its own molded plastic handle with hang hole. Tempered steel for long service, 6.5" long overall.
$5.50 each
pickset.jpg
Hook & Pick Set 4 pc.
This is a set of 4 steel picks and hooks with plastic handles.
$4.00 each
ezout11.jpg
Screw Extractor 1/8 - 1/4
This is an extractor for removing broken screws. Drill a 5/64" hole and twist out the broken screw with this extractor. Fits the small tap wrench perfectly.
$2.50 each
taps3.jpg
Machine Screw Taps 6-32, 8-32, 10-32
Quality High Speed Steel taps. No cheap junk made in asia. Great for chasing out and cleaning up threaded holes in brackets, posts, and other assemblies. Available in three very common sizes found all over pins; 6-32, 8-32, and 10-32. Fits the small tap wrench perfectly.
$3.25 each
Size
14-20tap.jpg
Machine Screw Taper Tap 1/4-20
Quality High Speed Steel taps. No cheap junk made in asia. Great for chasing out and cleaning up threaded holes in brackets, posts, and other assemblies. This is the 1/4-20 size. Fits the large or small tap wrenches.
$4.00 each
legtap2.jpg
Leg Bolt Taps
Quality High Speed Steel taps. No cheap junk made in asia. Great for chasing out and cleaning up leg bolt holes, leg leveler threads, and head bolt threads. Available in the most common size for leg bolts, 3/8-16. Fits the large tap wrench perfectly.
$5.00 each
Img122.jpg
Tap Wrenches
These are high quality tap wrenches. Small fits 0-1/4" taps, adjustable to fit the 6-32, 8-32, 10-32, and 1/4-20 taps sold above. Large fits the 1/4-20 and Leg Bolt taps. Sliding T handle helps reach tough spots.
$6.50 Small
$9.50 Large
Size
drillbits.jpg
Drill Bit Set, 13pc. Titanium Coated
This is a good little set of Inch sized drill bits. Titanium coated. Sizes include: 1/16", 5/64", 3/32", 7/64", 1/8", 9/64", 5/32", 11/64", 3/16", 13/64", 7/32", 15/64", 1/4".
$5.00 each
hexkey13pc.jpg
Hex Wrench Set 13 piece
This is a set of 13 long handle hex wrenches in SAE sizes for socket head (Allen) screws. Wrench sizes included are: .050", 1/16", 5/32", 3/32", 7/64", 1/8", 9/64", 5/32", 3/16", 7/32", 1/4", 5/16", 3/8". Comes in a plastic holder. Gets into the tight spots the T-handle set won't reach. Lifetime warranty from Great Neck Tools.
$5.00 each
starbits9.jpg
Tamper Resistant Star Bit Set 9 pc.
This is a set of 9 tamper resistant star or Torx bits. These are high-quality, high-strength bits made for professional mechanics. Sizes T-8, T-10, T-15, T-20, T-25, T-27, T-30, T-40 plus a 1/4" drive socket adapter. Comes in a plastic boot case for compact storage. Limited lifetime warranty from OEM Tools.
$5.00 each
100pcbits.jpg Security Bit Set 100 pc.
This is a large set of 100 security and regular bits. Set includes security Torx bits 8, 10, 15, 20, 25, 27, 30, 35, 40. Hex security bits in SAE sizes 5/64", 3/32", 7/64", 1/8", 9/64", & 5/32". Metric security hex bits in 2, 2.5, 3, 4, 5, & 6. Drilled spanner bits in 4, 6, 8, & 10. Torq bits in 6, 8, &10. Tri-point bits in 1, 2, 3, & 4. Also includes a magnetic hex bit holder in 1/4" Comes in a plastic case for storage.
$12.50 each
magtools.jpg
Magnetic Pickup Tool
These are telescoping pocket tools with a strong magnet on the end. Small size picks up over 2 lbs. Very slim with a pocket clip, it gets into tight spots. Large size picks up 8 lbs. With rubberized handle. Both extend to 25" overall.
Small $3.00 each
Large $5.00 each
Size
inclinometer4.png
Inclinometer or Pitch Locator
This tool is the easy way to set the pitch or slope on your playfield. Use this inclinometer directly on the playfield to determine the angle your pin is actually set to. The bubble gauges included in some pins can be wildly inaccurate. Includes magnetic base. This is a quality tool made by Mayes Brothers Tools. Larger 4 inch size.
$8.00 each
Img212.jpg
9" Torpedo Level
This is a quality tool made in the USA by Johnson Level & Tool. This level is the perfect size to check the side-to-side level of your playfield. Fits right on the playfield for the most accurate measurement. Also has vertical and 45 degree vials. Made of impact resistant plastic.
$2.00 each
Img128.jpg
Foam Scrubbing Swabs
These tough, absorbent foam swabs are great scrubbers. They stand up well to abuse. I find them very handy for cleaning the undersides of playfield inserts, under slingshot plastics and other hard-to-reach spots. Eight inches long overall, the foam section is about 3 inches. Hardwood handle. They rinse clean to be ready for more.
$2.50 each
plasticblades2.jpg
Plastic Razor Blades - Dozen
These plastic razor blades are great for scraping up the goo left over from a mylar removal job. Tough, almost unbreakable plastic but they won't scratch your playfield. Great for use with Orange Power to remove glue residue after Mylar removal. These are single edged with a sharp, beveled edge. Made in the USA. Pack of 12.
$2.50 per dozen
This is what you need ...
Home Page | About Us | Contact Us | Supplies | Brushes | Site Map | Links | Polishing Kits | Paint Pens | Hardware | Riveting | Misc. | Disclaimer | Gift Certificates | Shipping | Electronics
Img67.jpg
Air-Powered Stapler for Ground Braid
This air-powered stapler fires the exact size and type of staples that Williams used to attach ground braid and documents to the inside of pinball cabinets. Makes short work of a re-grounding project. Also powerful enough for lightbox rewiring and under-playfield wire stapling. Uses the bright silver or the copper color staples sold below, staples are not included. This long-nose version is great for getting into tight spots like pop bumper leads and under playfield wiring. Requires a compressor with a storage tank delivering at least 60 PSI at .36 CFM.
$95.00 each
Img67.jpg
Air-Powered Stapler for Ground Braid
This air-powered stapler fires the exact size and type of staples that Williams used to attach ground braid and documents to the inside of pinball cabinets. Makes short work of a re-grounding project. Also powerful enough for lightbox rewiring and under-playfield wire stapling. Uses the bright silver or the copper color staples sold below, staples are not included. This long-nose version is great for getting into tight spots like pop bumper leads and under playfield wiring. Requires a compressor with a storage tank delivering at least 60 PSI at .36 CFM.
$95.00 each
You're currently viewing posts by Pinsider superbee.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/demand-check-f14-tom-cat?tu=superbee and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.