About the sound hum.
Clean de volume pot on the coin door. With some spray contact cleaner , and then move the pot in all directions. And then check if the hum go away. (Appended to me on my xenon) good luck
You're currently viewing posts by Pinsider arqpuebla.
Click here to go back to viewing the entire thread.
About the sound hum.
Clean de volume pot on the coin door. With some spray contact cleaner , and then move the pot in all directions. And then check if the hum go away. (Appended to me on my xenon) good luck
About ball trought problem. Try desoldering the switch on the middle, #28. Xenon was designed originally to have 3 balls. But in the end they changed their mind , and went to production with only 2 balls, but that switch was not removed. And it's common to get you some issues. The fix is to desoldering it's cables.
Again , was my experience with my xenon, and saw that fix on some place I can't remember.
You're currently viewing posts by Pinsider arqpuebla.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/debuging-xenon?tu=arqpuebla and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.