Dealer's Choice
Williams, 1974Working on a Williams Dealers Choice.
Plug pin in
turn on toggle switch
G.O re. Latches
Drop coin in
Coin re does not activate
Press L. Flipper
Lock re. Locks
No Playfield or backglass lights. (Possible Bad connection? Cleaning Jones plus)
No Flippers ?
Check all fuses correct fuses installed.
Any ideas or help is well appreciated.
Thanks
Kickout
BF881C02-4085-4CD8-95A7-96FD039A0002 (resized).jpegIf the Replay button doesn't activate the Replay relay, Inspect and diagnose this circuit with Alligator clip jumper wires
http://www.planetimming.com/Pinball/troubleshooting/EM%20Troubleshooting.pdf
http://www.pinrepair.com/em/index3.htm#features
Example of a pinsider actually doing this https://pinside.com/pinball/forum/topic/red-baron-tech-question#post-5858156
pasted_image (resized).pngQuoted from Kickout:No Playfield or backglass lights. (Possible Bad connection? Cleaning Jones plus)
No Flippers ?
Check fuses.
Capture (resized).pngCapture1 (resized).PNGHowardR
If I am following your statement I would put a jumper on the yellow wire off the transformer And them touch the white/brown wire on the Replay re. If it fires then I would drop back to Game Over re switch, and keep doing this until I find where the Replay re does not fire. Is this correct.
Kickout
Quoted from Kickout:HowardR
If I am following your statement I would put a jumper on the yellow wire off the transformer And them touch the white/brown wire on the Replay re. If it fires then I would drop back to Game Over re switch, and keep doing this until I find where the Replay re does not fire. Is this correct.
Kickout
Roughly, yes. Some switches along the way will already be closed and those can be tested how you said. Other switches will be open and you'll have to close those manually and/or close them in game operation.
Does that make sense?
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/dealers-choice-start-up-problem?hl=kickout and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Bel Air, MD