Shrewsbury, NJ
LE owner here.
(Topic ID: 222766)
Linked Games
Deadpool (Limited Edition)
Stern, 2018-
Deadpool (Premium)
Stern, 2018
-
Deadpool (Pro)
Stern, 2018
Topic Gallery
You're currently viewing posts by Pinsider trekkie1978.
Click here to go back to viewing the entire thread.
1 year later
Does anyone have a before and after if the anti-sway target. I never heard of that product before.
How do you install it?
3 weeks later
Quoted from PinMonk:I can't imagine a nice .250" or .375" PETG wouldn't be enough. PET-G is really tough the thicker you go.
Also coil power set to soft.
Has anyone been making that plastic with PET-G?
1 week later
Quoted from PinMonk:The cliffy set has a piece for that, so I didn't recommend the washer route. Although if you DON'T get his set, DEFINITELY do a washer.
Which do you think it better? Your fix or the cliffy?
I'll be getting my game in a few weeks and I definitely will do one of these 2 fixes.
Thanks!
Quoted from 85vett:Prem/LE owners - I've been told that the right ramp diverter is adjustable and should not be making contact with the PF. I would 100% check yours now before your PF gets damaged like mine has been.
I'll be opening game in a few weeks.
I think I'll put a piece of mylar down there to be on the safe side.
1 week later
Quoted from 85vett:Agreed. 100% of the time, when you get a new game (especially Stern) go in and turn that power way down. I think they have it so high for route games. As those coils get dirty if they get to weak it will have ball eject problems. In a home game that is kept clean that is not an issue.
Any game I own with that adjustment, I put it to the lowest possible setting.
I don't mind the half more second I need to wait.
1 year later
Finally received my Deadpool LE yesterday. Distributor held on to it for me until new house was ready.
First, thank you everyone to pointing out the piece behind the little Deadpool that needed to washers. I got that fixed before I even put the balls in the game.
I was able to install all the cliffys too. Game is nice and protected.
All I have to say is…….HOLY SHIT!!!!!!! I think this is the most fun I’ve ever had playing pinball. Layout is unique and fun. Everything they threw into this game. Just OMG…I don’t know where to begin. Blown away is an understatement. The game had me cracking up.
Here’s a pic from my first game on it (I did update code too).
Is code complete or are we expecting any updates?
I have an LE.
What do I need to do in order to get the Disco ball to spin?
Note: Just got the game 3 days ago, so I'm still learning the rules.
Quoted from c818919taylor:Referring to post 3865?
I don’t remember which post number. I just remember pinmonk posting about it and how he prevented it going forward.
Please don’t judge my corniness - dorkness - nerdness- well, you get the idea.
But does anyone else find themself just saying “boom” out loud during the day, or is it just me?
Make sure you get washers on the Wolverine shot. And also the left ramp, it will dig into the playfield. I put a piece of mylar over the paint that chipped to hold it in place. Luckily, that area isn’t seen. 357443E1-8F2E-47FE-BF8E-36E1F762AE5D (resized).jpeg0B8D147A-4994-4130-B902-05634678A02E (resized).jpegA31B379E-D130-4676-A823-D2EFFD6BBD0C (resized).jpeg
Quoted from c818919taylor:By Dazzler?
It’s the ramp that feeds the left flipper. In the back, there’s a post that goes through the playfield. This needs a washer. I will post a picture later.
9 months later
Is everyone protecting their playfields with washers?
I put them under the left ramp, the hot under that ramp, wolverine shot, and behind little Deadpool.
9 months later
Quoted from SirMachismo:Nice work, that’s how it starts. the Ninjapocalypse (MVX) skill shot is the best in pinball! Hitting it is so satisfying.
How do you do that?
Promoted items from Pinside Marketplace and Pinside Shops!
You're currently viewing posts by Pinsider trekkie1978.
Click here to go back to viewing the entire thread.
Reply
Wanna join the discussion? Please sign in to reply to this topic.
Hey there! Welcome to Pinside!
Donate to PinsideGreat to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
