Austin, TX
I continue to have the EXACT same issues others with my build date (May 2022) are having: glass neigh impossible to remove and Lil' Deadpool drop targets that don't drop with a fast/hard shot.
Any updates on these issues?
(Topic ID: 222766)
Linked Games
Deadpool (Limited Edition)
Stern, 2018-
Deadpool (Premium)
Stern, 2018
-
Deadpool (Pro)
Stern, 2018
Topic Gallery
You're currently viewing posts by Pinsider ticktockman.
Click here to go back to viewing the entire thread.
1 week later
Quoted from Dalewin:Add me to the group. Waited patiently for this and it’s finally here. Love it. Got a cool surprise too - George autographed it! Not sure if they are extras from LE run years ago or he just surprises a few owners here and there but pretty cool! As far as issues - glass is fine but menu buttons barely work. Born May 13th, 2022.
[quoted image][quoted image][quoted image][quoted image]
Where does he sign it? I have one made that same day.
1 week later
I bought Lucxor’s awesome Katana mod secondhand off the marketplace but it didn’t come with any installation instructions. Can anyone help with the install.
Quoted from punkin:How am i not friendly? Do you mistake aggression in something i've said?
I'd already given my opinion in the first post, you asked for justification of that opinion. There's no way you could interpret it otherwise. You are still asking for justification in a 'key point or two' without bothering to look for yourself.
I just said that i don't see a point in justifying a subjective opinion.
Move along sir.
Your post did come off super-flippant and jerkish.
Quoted from SirMachismo:There are two black screws with washers on the left side of the Katana handle that you have to remove. Be careful not to drop any of it, I used a magnetic Philips head screw drive and a micro fiber cloth underneath the handle. Then slowly lift up the left side of the plastic katana handle and slowly rotate it all clockwise & a touch to the right. You will clear the tabs on the right side that are inserted into the right side of the katana handle. Do everything in reverse with the existing screws and the Lucxor katana handle, don't forget to choose what color gel to install.
Side Note: I removed my Dinopool because it was in my way (same deal remove two black screws), The directions also warned to be aware of the Wolverine plastic...so don't break it.
Additional Side Note: My Lucxor katana handle wasn't catching the tabs on the right side as securely as I would have liked so I cut two small pieces of 3M Double Sided tape and made a hole in the center of them and stuck them on the inside of the Lucxor Katana Handle over the screw holes. Then stuck a washer (#6 size I think) to the inside of the tape and installed the handle. The spacer that the washer became allowed for a more secure latching of the handle.
hope this helps.
[quoted image][quoted image]
Thanks so much! What about the LED’s that came with it? Where do those plug in at?
Anyone think about getting the Stern TMNT katana shooter rod and putting it on DEADPOOL? Maybe paint the wrapping red (instead of blue)?
2 weeks later
I have Lucxor’s katana handle mod and am trying to find which film insert will display yellow. When I put the yellow film in it comes out green - any ideas?
Promoted items from Pinside Marketplace and Pinside Shops!
You're currently viewing posts by Pinsider ticktockman.
Click here to go back to viewing the entire thread.
Reply
Wanna join the discussion? Please sign in to reply to this topic.
Hey there! Welcome to Pinside!
Donate to PinsideGreat to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
