(Topic ID: 222766)

Deadpool owners club. Free chimichangas for all.


By Ericc123

10 months ago



Topic Stats

  • 3,410 posts
  • 338 Pinsiders participating
  • Latest reply 8 hours ago by kingau
  • Topic is favorited by 133 Pinsiders

You

Linked Games

Topic Gallery

There have been 766 images uploaded to this topic. (View topic image gallery).

20190618_125316 (resized).jpg
20190618_130150 (resized).jpg
20190618_130252 (resized).jpg
pointed-shooter (resized).jpg
20190614_162824 (resized).jpg
20190614_162847 (resized).jpg
8F833E08-DF22-484F-9748-A38EF79E368B (resized).jpeg
32C93323-1CDB-4876-883F-E66BC5495CD0 (resized).jpeg
DP-LE-Details-01 (resized).jpg
Screen Shot 2019-06-10 at 9.22.36 AM (resized).png
7D4C84A3-09E2-422A-8FFF-2A560FBC813C (resized).jpeg
IMG_20190307_004433-1.jpg
IMG_20190307_004421.jpg
IMG_20190306_233348.jpg
0F8B6F5C-24F1-48E7-946C-F391DD25EE0A (resized).jpeg
8D69AD43-D153-4479-BD9F-33E7E19F17AF (resized).jpeg

Topic index (key posts)

3 key posts have been marked in this topic

Post #1867 Deadpool Pro with Katana side armor installed Posted by StoneyFL (3 months ago)

Post #2155 Stern Ninja Star bumper cap kit Posted by twenty84 (89 days ago)

Post #2389 Hooked On Pinball Ninja Star bumper caps Posted by Robertstone0407 (66 days ago)


Topic indices are generated from key posts and maintained by Pinside Editors. For more information, or to become an editor yourself read this post!

You're currently viewing posts by Pinsider robertstone0407.
Click here to go back to viewing the entire thread.

11
#66 10 months ago

I just coated a deadpool and it will be at the cleveland show in September. I was really pleased with this finish. Hit me up if youd like your pro worked over

20180821_161237 (resized).jpg20180821_161253 (resized).jpg20180821_161256 (resized).jpg20180821_161318 (resized).jpg20180821_161321 (resized).jpg20180821_161345 (resized).jpg20180821_170210 (resized).jpg20180821_170213 (resized).jpg20180821_170224 (resized).jpg20180821_172128 (resized).jpg20180821_172129 (resized).jpg20180821_172137 (resized).jpg20180821_172139 (resized).jpg20180821_172144 (resized).jpg20180821_172231 (resized).jpg
10
#67 10 months ago
FB_IMG_1534928353897 (resized).jpgFB_IMG_1534928385211 (resized).jpg
#70 10 months ago
Quoted from Yelobird:

Dare I say this as I am a supporter of Pin Stadium lights in Many of my pins but watching this Twitch feed I really didn’t like the candy cane sword effect or matching ramp? The lighting looked great on the Playfield but this game might be tricky with the shiny metal and especially the disco ball LE to pull off the lights. Definitely going to try a set as this may have been an oddly lit recording but not so sure on this one.

I saw it in person and it looks differnt. Also it was alot of his settings being very golden. I'd personally go more white and let the art do its work

#72 10 months ago
Quoted from twenty84:

In the pics it looks looks like additional lights were used for the stream and not just the pin stadiums. Was this the case? I also found the “candy cane” effect on the sword/left ramp and the frequent blasts of UV light very distracting in last nights stream.

It's pretty custom to be honest. He set the flasher up to go off really frequent but you can set it up anywhere really. If you set it to a more white light from yellow and red it will really compensate for candy cane. It doesn't bother me but maybe it isn't a game youd want to put a set in

1 week later
#119 9 months ago
Quoted from RipleYYY:

just WOW ! remind me x-men magneto... good point than

If youd like it done it me up

#132 9 months ago
Quoted from Lermods:

Shaker not enabled yet, for those wondering. 7 degree pitch is recommended for best game play, helped my lock shot.

Damn it I just bought a shaker today for it lol

#166 9 months ago

My biggest complaint is little deadpool multiball. I wish itd let you lock a ball and save that or add the stealing factor between games. I also dont like you lock a ball and you cant start a battle then cash in

#168 9 months ago
Quoted from chuckwurt:

Start the battle first then go after little Deadpool.

Why not preload it? Seems dumb

3 weeks later
#535 8 months ago
Quoted from Mrawesome44:

Unless I get an le. I think I’m just going to powdercoat a pro

Here ya go. Hit me up

20180821_172132 (resized).jpg20180828_185656 (resized).jpg20180828_185701 (resized).jpg20180828_185706 (resized).jpg20180923_183246 (resized).jpg
#646 8 months ago

For those of you rocking pinstadiums but hate the zebra striping they leave on the sword ramp. Right heres your fix. It me it its 70.00 shipped back to you. Bright silver powdercoat

20181001_175531 (resized).jpg20181001_175533 (resized).jpg20181001_180128 (resized).jpg20181001_180133 (resized).jpg20181001_180145 (resized).jpgreceived_266679813957995 (resized).jpeg
#650 8 months ago
Quoted from Vino:

You do impressive work.
In essence, is this the first mod for a mod?

Yes lol

2 weeks later
#838 8 months ago

Members I am in desperate need of your aide. I've grown to love deadpool after owning a pro since the first wave out and hold it as one of my favorite games. I'm about to sell my pro and upgrade to an LE but for obvious reasons I see both sides of the coin. Cost to reward. I rarely ever sell games and it'll go good next to my X-Men magneto LE. I need feedback

#840 8 months ago
Quoted from Murphelman:

From what I gather the changes are mostly cosmetic. The drop targets may slow down the ball but for the most part the game plays exactly the same. If it is worth it to you than go for it. I am just going to buy the Disco Ball mod that just came out.

I've player the LE and really enjoy the loop shot

#844 8 months ago

Its become one of my favorite games so that's the motivation for going LE plus I got a deal on the price

11
#873 8 months ago

Sold my pro, upgraded to the LE today. Happy boy

#917 7 months ago
Quoted from Jerol:

The Battle scoop on my LE ejects the ball too far to the right -- it's hitting the inlane rail just behind the right flipper every time. Then it bounces into the slings where it's out of control and often side drains. It really should be hitting the right flipper, but it misses every time to the right. Is there any way to adjust the eject trajectory from that scoop? There is no setting for it I can find in the utilities or adjustments menu (I saw on some other games where scoop eject strength could be adjusted in settings, but there doesn't seem to be one for DP).
Any ideas?

Lift the playfield and look at the coil kick out alignment you can prolly tweak it slightly by hand

#926 7 months ago

Where is the paper for the LP and when is it getting released

1 week later
#969 7 months ago

So I had a pro and upgraded to the LE and I feel I got the playfield multiplier alot more than on my LE. Has anyone adjusted theirs and found a sweet spot?

2 weeks later
#1070 7 months ago

Is it just me or is the playfield multiplier way too short now?

#1078 7 months ago

I adjusted mine and now if you really aim it isnt to hard at all

20181031_165724 (resized).jpg20181031_165728 (resized).jpg
#1081 7 months ago
Quoted from nicknack66:

How did you adjust it? With your adjustment it is definitely more angled than on my game. I am not very good at making that shot - not sure if it's my lack of skill or the way it's currently adjusted on my game, perhaps a combination of both? Thanks.

Lift the playfield and loosen the screws that mount it to the playfield. If you dont adjust it take one out and angle it the way you want and you'll have to drive the screw in where there is no longer a hole. Huge gameplay change. If you aim you'll find yourself hitting it more. The slot cut for it has a huge adjustment window like it should be able to adjust

#1083 7 months ago

Code says .95 but theres alot of bugs and stuff that needs added really

#1102 7 months ago

Just powdercoated a clients premium red and I was suprised how good it came out. Did the wireforms candy red too. Hit me up if youd like your game done

99277 (resized).jpeg99278 (resized).jpeg99279 (resized).jpeg
2 weeks later
#1250 6 months ago
Quoted from mannymasy:

It is difficult to find the solution for me ... hahahaha

Adjust your leaf switches so they are a bit more sensitive so it will trigger the mech before the ball can get too bar into the mech

#1267 6 months ago
Quoted from Mahoyvan:

Just want to double check how you drilled your pilot hole.
Stock, my target is fairly square with the hole and yours looks like the south end as been pulled in.
[quoted image]
So did you just adjust the one top screw by re drilling to the right?

Yes but you barely need a pilot hole please be careful. Pivot it and make sure it dont rub the pop bumper. You'll love the game play change

2 months later
#1780 4 months ago

Mail call

20190211_154046 (resized).jpg
1 month later
#2205 79 days ago
Quoted from Gov:

Has anybody done powder coated armor on their premium yet? Trying to figure out what color would look good.

I coated this one for a customer. If your interested contact me and we can work something out

99277 (resized).jpeg99279 (resized).jpeg
1 week later
#2389 66 days ago

Installed these from hooked on pinball. They are bad ass and made of real metal not plastic. Blown away. Easy install. Im gonna solder in a bigger brighter led though as they dont light up much

20190412_161628 (resized).jpg20190413_214544 (resized).jpg20190413_214600 (resized).jpg
#2394 66 days ago
Quoted from cpr9999:

I love the look of these - is there anything that can be done to get the RED led color is the middle - brighter red like the current red plastic domes??

Stern is cheap and dont use sockets its a little cheap board with an LED. Im gonna solder in a red wedge led light

#2401 66 days ago
Quoted from Pinzap:

Ok... Wasn’t aware there weren’t actual led bulbs in the new pops since i hadn’t looked inside. robertstone0407 , would you consider posting a pic of before and after if you do the solder on new leds like you said.

Tried soldering a red led. It works but the change from the players perspective is negligible. Im still happy with the mod but would like it to light more red

20190414_172051 (resized).jpg20190414_172756 (resized).jpg20190414_172800 (resized).jpg
#2402 66 days ago

Actually in gameplay they shine brighter. In attract mode they dont recieve full led power or i just notice it more. Very happy with the mod. Dont be afraid to buy, totally worth it

#2406 65 days ago
Quoted from cpr9999:

Is the star - dome on the new hookedonpinball’s version clear?
If they are white led boards by Stern - one option is to put in a red filter. Probably won’t be bright enough. Thoughts on this?
So next option- solder in red led strip by comet pinball - with a few leds to make bright.

Yes i filtered it to red and installed red leds. Im happy they looks great

Promoted items from the Pinside Marketplace
7,000 (Firm)
Machine - For Sale
Orlando, FL
$ 50.00
From: $ 20.00
Cabinet - Other
Rock Custom Pinball
$ 9,999.99
Pinball Machine
Little Shop Of Games
$ 119.95
Playfield - Toys/Add-ons
Hookedonpinball.com
$ 7,499.00
Pinball Machine
Little Shop Of Games
From: $ 40.00
Cabinet - Other
Rock Custom Pinball
$ 279.95
$ 49.99
Lighting - Led
Comet Pinball
Wanted
Machine - Wanted
Pittsburgh, PA
Wanted
Machine - Wanted
York, PA
$ 7,499.00
Pinball Machine
Classic Game Rooms
$ 169.00
Gameroom - Decorations
Lit Frames
$ 129.95
Lighting - Interactive
Hookedonpinball.com
$ 5,799.00
Pinball Machine
Little Shop Of Games
$ 5,799.00
Pinball Machine
Operation Pinball
$ 15.00
Cabinet - Other
Pin Monk
$ 7,499.00
Pinball Machine
Operation Pinball
6,900
Machine - For Sale
Fruitland Park, FL
$ 125.00
Cabinet - Toppers
Sparky Pinball
$ 5,799.00
Pinball Machine
Flip N Out Pinball
$ 279.95
$ 10.00
Cabinet - Sound/Speakers
Gweem's Mods
Great pinball charity
Pinball Edu

You're currently viewing posts by Pinsider robertstone0407.
Click here to go back to viewing the entire thread.

Hey there! Got a moment?

Great to see you're enjoying Pinside! Did you know Pinside is able to run thanks to donations from our visitors? Please donate to Pinside, support the site and get anext to your username to show for it! Donate to Pinside