Topic index (key posts)

43 key posts have been marked in this topic, showing the first 10 items.

Display key post list sorted by: Post date | Keypost summary | User name

Post #264 MODS: Disco Ball (for Pro machines) by Lermods Posted by Lermods (5 years ago)

Post #270 TECH: PLAYFIELD. Katana ramp shot troubleshooting Posted by chuckcasey (5 years ago)

Post #385 MODS: Tilt Graphics art blades - installed with photos Posted by jeep-mustang (5 years ago)

Post #414 RULES: Deadpool Rulesheet - 1.02 Posted by jeep-mustang (5 years ago)

Post #544 TECH: PLAYFIELD. Post Rubber wear Posted by HighProtein (5 years ago)

Post #638 Cliffy's - Installed with photos Posted by cpr9999 (5 years ago)

Post #646 Bright silver powdercoat for Katana Posted by Robertstone0407 (5 years ago)

Post #725 TECH: SOUND. External Subwoofer Hook-up Posted by _xizor (5 years ago)

Post #889 MODS: "HELLHOUSE" villains lair by The Mod Couple Posted by Yelobird (5 years ago)

Post #894 LIGHTING: Comet GI lighting upgrade - installed with photos Posted by Melhadmj (5 years ago)

Show all 43 key posts in the index

Topic indices are generated from key posts and maintained by Pinside Editors. For more information, or to become an editor yourself read this post!

You're currently viewing posts by Pinsider pinash.
Click here to go back to viewing the entire thread.

Quoted from Lateralus:
Has anyone had their ball go sdtm after the mini Deadpool lock releases the ball? My game is at 7.0 and even side to side. The ball is in the right corner of mini Deadpool and when the drop targets drop to release it, it goes sdtm.
Also, my drop targets there don't always go down if they are hit hard dead on. Anyone have these issues and have fixed them?
My apologies if this has been addressed, but my search skills fail, apparently.

Sometimes perfectly level side to side is not what you want. Try dropping your front left leg by a thread and see how it plays.

Quoted from Lateralus:
Thanks for responding. My front legs are already flat on the floor and it's at 7.0. Are you suggesting I raise my front legs a bit, then drop the front left a bit, then raise the back again to keep 7.0? I had it on 6.5, 6.7 for a while, but love 7.0. All of my games are even side to side, so just trying to understand.

Sure, obviously working slow and making minor incremental adjustments. When I set up my games, make sure not to bottom out the front adjusters. I leave maybe 1 or 2 rotations to help with dialing in.

Does Deadpool suffer from flipper fade at all (I haven't gotten to play mine for long durations yet)? Is there any benefit to flipper coil fans on DP?

Quoted from fooflighter:
Okay, I'm going to make a separate thread eventually but I'll address this here as I just went through this and will save you HOURS of wasted time and frustration. I have these DIY translucent target mods on my Deadpool Premium, Star Wars Premium, and Walking Dead LE
Disclosure: I have no affiliation to or with the products I'm endorsing
1. Order your Stern Translucent drops from here: (They are the best ones available I have tested, don't bother with ANY others, I'll save you that frustration)
https://www.ministryofpinball.com/en/catalog/product/view/id/7791/s/milky-clear-stern-drop-target-545-6305-00/
2. Get these drop replacement springs from Pinball Life
https://www.pinballlife.com/ghostbusters-scoleri-brothers-drop-target-spring-fix-kit.html
They are originally for the Ghostbusters drop target fix but serve the same purpose here. The concept is they are the same width but shorter, and thus provide more tension. Like Ghostbusters, Deadpool also has drops close to the flippers and with a direct hit, especially with the stronger translucent targets, you will get Drops that stay up and rebound the ball. These springs help pull the targets down regardless of flipper power and direct hits.
3. Make sure to use acrylic paint or nail polish to cover the optic tabs to help the sensors recognize the target position.
[quoted image][quoted image][quoted image][quoted image][quoted image][quoted image]

And the drop target decals?

Quoted from Shredso:
Looks good. My Godzilla LE apron has these cutouts (populated with lights) but my latest run Deadpool Premium does not. The apron that came with an IC kit has them, I can either trace those onto my DP and drill, or just transfer the stickers.

I would keep the original DP apron with the full stickers, then move the IC to the door

How are the outlane posts set from the factory? And do the mini posts between inlane/outlane have rubbers (from the factory)? Thanks!

Has anyone got a random crash/reset with the newer code? I’m on 1.0.7 and got one tonight.

Promoted items from Pinside Marketplace and Pinside Shops!

You're currently viewing posts by Pinsider pinash.
Click here to go back to viewing the entire thread.

Reply

Wanna join the discussion? Please sign in to reply to this topic.

Hey there! Welcome to Pinside!

Donate to Pinside

Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!

Help – Contact – About Pinside – Support Pinside – Top

Deadpool owners club. Free chimichangas for all.

By Ericc123

5 years ago

Topic Stats

You

Find in topic

Linked Games

Topic Gallery

Topic index (key posts)

Pinash

Pinash

Pinash

Pinash

Pinash

Pinash

Pinash

Reply

Hey there! Welcome to Pinside!