Deadpool (Limited Edition)
Stern, 2018
Deadpool (Premium)
Stern, 2018
Deadpool (Pro)
Stern, 2018You're currently viewing posts by Pinsider lrrr.
Click here to go back to viewing the entire thread.
Just got my pro set up! 2nd pin. Couldn't believe how easy it was to get the backbox off compared to the Wonka. Installed new apron cards--took a while to figure out that all I had to do was resize the picture in notepad. Next mod will be to replace that super noisy fan. Kinda wish I had a premium, so might ge a JP premium. I've got a fever, and the only cure is more pins.
20200322_122327 (resized).jpgQuoted from daveyvandy:Let's go crazy. See if you can spot all the crazy additions in my last photo.
In pic#4 there is a sai, the ninja star on the pop bumper, but also the arm of a figurine at the hilt of the katana. Colossus? Can't make out on pic 8. Great mods!
Quoted from 85vett:Already have the anti lean bracket so nothing else I can do. Yes, it leans slightly but at this placement I'm 50/50 on shots to the snikt target that are accurate to the spot that would push it up the Playfield X spot.
I think there is one more thing you can do... I am convinced that I have left flipper fade from a hot coil. It is definitely hotter than the right after a lot of games or long cradles. Very little chance of hitting snikt once this occurs and even the right katana ramp shot becomes harder. I am going to pick up a pinmonk flipper fan when he has them ready, as discussed on STh forum. (Coil sleeve replacement helped a little.)
Quoted from Eskaybee:Can anyone tell if the Snikt anti-lean target Actually improves that shot accuracy?
Haha, not sure, but I sure feel better about it after installing. It is a worthwhile thing to do. Mine had the old bracket, and was tilted a few mm.
Quoted from PinMonk:Can you do me a favor and PM me a couple pictures of the coil area, left and right on your Deadpool? I didn't take pictures of that before the one here left. Want to know if either the STh or TMNT fan brackets will work, or if I have to make a third design for them to fit.
A few pictures sent. Kind of low res compared to regular posts for some reason, but maybe they will help.
Quoted from ABE_FLIPS:I guess the main issue with the SNIKT target are the airballs.
I made my own Airball protector, still figuring this out.
It looks like the protector has to reach the middle of the ramp.
The original protector is on top for comparison.
[quoted image][quoted image]
I will also be on the lookout for rejects like that. Nice video.
Quoted from awesome1:What's really surprising is how much the Snikt target flops around! Unless that's the lights strobing making it look like it's moving?
Wow, looks like it really does vibrate a lot
Quoted from shaunpurslow:Thank you so much! This is excellent advice! I would have totally forgotten to take the balls out. Hahah. Looks like I need to buy some microfiber cloths too. You just gave me a boat load of confidence. Really appreciate it.
Many thanks to everyone with their wonderful support. I can't wait for this thing to get here.
And if you pick up a JJP at some point, you don't need to take the balls out to raise the playfield
You're currently viewing posts by Pinsider lrrr.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/deadpool-owners-club-free-chimichangas-for-all?tu=lrrr and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Seattle, WA