Topic index (key posts)

43 key posts have been marked in this topic, showing the first 10 items.

Display key post list sorted by: Post date | Keypost summary | User name

Post #264 MODS: Disco Ball (for Pro machines) by Lermods Posted by Lermods (5 years ago)

Post #270 TECH: PLAYFIELD. Katana ramp shot troubleshooting Posted by chuckcasey (5 years ago)

Post #385 MODS: Tilt Graphics art blades - installed with photos Posted by jeep-mustang (5 years ago)

Post #414 RULES: Deadpool Rulesheet - 1.02 Posted by jeep-mustang (5 years ago)

Post #544 TECH: PLAYFIELD. Post Rubber wear Posted by HighProtein (5 years ago)

Post #638 Cliffy's - Installed with photos Posted by cpr9999 (5 years ago)

Post #646 Bright silver powdercoat for Katana Posted by Robertstone0407 (5 years ago)

Post #725 TECH: SOUND. External Subwoofer Hook-up Posted by _xizor (5 years ago)

Post #889 MODS: "HELLHOUSE" villains lair by The Mod Couple Posted by Yelobird (5 years ago)

Post #894 LIGHTING: Comet GI lighting upgrade - installed with photos Posted by Melhadmj (5 years ago)

Show all 43 key posts in the index

Topic indices are generated from key posts and maintained by Pinside Editors. For more information, or to become an editor yourself read this post!

You're currently viewing posts by Pinsider knackers.
Click here to go back to viewing the entire thread.

Just like Beatnik-Filmstar I too just put down a deposit on Deadpool Premium today I have read every post over the last few months Phew! and look forward to June for its delivery. I'm definitely doing the Katana ramp washers and mylar, Cliffy's for the shooter lane and comet lighting kit. I was wondering if the shooter lane protector is needed? https://cointaker.com/products/pinball-shooter-lane-protector and are there any other Cliffy's that others recommend, thanks in advance and thanks to Smack for the great pics with the before and after shots of the comet lighting definitely sold me on that.

Quoted from Mr_Outlane:
Me too! WD stands for Water Displacement. To keep moisture out. That is it's purpose. Not to lubricate. My guess was just to clean it?

https://wd40.com.au/

Screenshot_20210705-172045_DuckDuckGo (resized).jpg

Quoted from ABE_FLIPS:
People tend to recommend WD-40 for everything, but in reality in nearly every area of application I used it, WD-40 made it worse.
I only use it for tight/rusty screws that i cant unscrew, because it creeps in every little slit.
WD-40 cant easily be removed, it collects dirt and dissolves plastics or rubbers, i dont want that in my machines.
By the way, the katana ramp on a well set up DP works very well.

Totally agree, there are much better options out there for most situations.

Hey guys, I noticed that when applying washers at the base of ramps that there are 2 methods being used. Either mylar or a nylon washer as a base for protecting the playfield from the metal washer. Is one better than the other or it doesn't really matter.

Quoted from Beatnik-Filmstar:
I went nylon washers alone under all the rails and haven't seen any issues at all after 800+ plays. Rails still being held noticeably off the playfield, and the only issue hitting the katana ramp is constantly doing it on accident starting ninja multiball without a mode running.

Thanks for all the replies, I reckon I'll give this a go, cheers.

Hey guys, I'm waiting on delivery(hopefully this week) of my Deadpool premium. I'm familiar with the Katana ramp washer fix but not so up with the Wolverine spinner problem. What is the problem with it and the fix, thanks.

Quoted from Smack:
The ball guide behind that spinner can also dig into the clear and if left unattended can chip some of the clear and paint off behind it. Chances are any chips will be covered by the plastic back there but good prevention with a few washers if you are doing the Katana guide at the same time.
You may also want to address the left ramp as the straight edges that sit on top of the playfield can also eat into the clear and also cause chipping.
Given you have a brand new Prem the end of the Katana guide with the blue nub on it may be adjusted from the factory to reduce wear in that spot specifically. However I would still put washers down as the middle part of the guide can still dig into the clear. You'll see powder start to come up around the bottom edges of the guide.

Thanks Smack appreciate the info.

Quoted from TheProgrammer:
Seems like v1.06 changed the weapon extra ball to 30 weapons instead of 10! I'm not seeing that listed in the change logs tho?

I got my Prem in September and it's set at 25

I use Ninja balls in mine and have no problems.

The right sling spotlight came off second best

20220402_170842 (resized).jpg

I've got mirror blades on my Premium and love em.

Quoted from Beatnik-Filmstar:
I believe this last one requires the right orbit before the snikt! shot as well. I don't think just plunging straight into a snikt! shot does it. Sure as Hell could be wrong though. Hell - I've never even done it on purpose. The handful of times I've pulled it off were after missed tries for the 3rd shot listed. Plunge - Orbit - Katana shot bricks perfectly and ball ends up on left flipper - Snikt! in time to still register.

Did this last night by accident. I had actually forgot about this one as I had considered unachievable.

Quoted from Multiballmaniac1:
Picked up yesterday. Thank you Pinball Dudes Florida.
[quoted image]

I have that same line up, cheers.

Quoted from SiN13:
I tried to take it easy with the number of mods on this one compared to Godzilla but went with all these as well.
I'm a sucker for mods that are made of metal instead of 3D printed plastic and spent a little extra to get these nice ninja star pop bumper caps. The only tough part of the install on the pro was dealing with the riveted Wolverine plastic.
https://mezelmods.com/collections/deadpool-pinball/products/deadpool-pinball-pop-bumper-upgrade
[quoted image]
One last mod I'm waiting to get is the katana handle by Lucxor whenever he plans to do another run. There are a couple others out there but I really like the quality and the style of this one.
https://pinside.com/pinball/market/shops/1327-lucxor/06890-lucxor-katana-handle
[quoted image]

I have the Lucxor handle, very nice work.

Promoted items from Pinside Marketplace and Pinside Shops!

You're currently viewing posts by Pinsider knackers.
Click here to go back to viewing the entire thread.

Reply

Wanna join the discussion? Please sign in to reply to this topic.

Hey there! Welcome to Pinside!

Donate to Pinside

Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!

Help – Contact – About Pinside – Support Pinside – Top

Deadpool owners club. Free chimichangas for all.

By Ericc123

5 years ago

Topic Stats

You

Find in topic

Linked Games

Topic Gallery

Topic index (key posts)

Knackers

Knackers

Knackers

Knackers

Knackers

Knackers

Knackers

Knackers

Knackers

Knackers

Knackers

Knackers

Knackers

Knackers

Knackers

Reply

Hey there! Welcome to Pinside!