Vancouver, BC
Thinking of picking up a HUO Deadpool Premium - anything to look for on inspection? Things to watch out for?
(Topic ID: 222766)
Linked Games
Deadpool (Limited Edition)
Stern, 2018-
Deadpool (Premium)
Stern, 2018
-
Deadpool (Pro)
Stern, 2018
Topic Gallery
You're currently viewing posts by Pinsider junglist.
Click here to go back to viewing the entire thread.
Just joined the club with LE #393 ! Few questions:
Is there a shortcut to restart the game if someone presses start too many times? For example on GB I can hold left flipper and start and it will reset.
Is there an easy way to install the washers under the Katana lock ball guide? Or does it involve removing all the pieces similar to this post below? Any other tips on protecting the game? Is it only this ball guide that seems to need it?
Is there a code updated expected? It seems pretty polished to me!?
Running into an issue, I'm finding the left flipper coil is getting really hot (plunger too). Like burn your finger if you hold it too long hot. I checked out the coil stops and they look ok, swapped the coil sleeves (no apparent wear or anything really), and checked the EOS is registering in the switch test.
I assume this is not normal? Any ideas on what to check next?
I took a quick look and it looks like there are two different coils:
Left part number: 090-5020-20-ND
Right part number: 090-5032-ND
So maybe this is normal since they have different specs?
I took a look through the thread but can't seem to find any guidance on Deadpool flipper alignment, should the hole be at the top, bottom or tip of the flipper for Deadpool? What was factory set at?
Also on the right outlane, mines set to open, I assume the middle setting was factory?
Cool thanks for the flipper tips...
Next question, the Snikt shot and the Katana lock, I assume these are supposed to be challenging shots and not something to do from a cradle typically. I find my DP plays these shots best off a moving ball which may be why some people are recommending 7 degree pitch as this would give it even more momentum?
Quoted from beergut666:Katana ramp is smooth as silk also.
Sounds nice, how's the flipper alignment? Share a pic?
Quoted from beergut666:it has always shot well with no flipper hop from the inlanes on either side
Cool thx, looks like they are lined up a little higher than mine - may have to give it a shot!
Quoted from pinbuoy:Isnt there a way to clear high scores except for GC?
yes, I just did this, there are two options - clear High scores and clear GC
2 weeks later
Quoted from durgee7:Similar issue here. My new anti-sway bracket from pinball life works but I'm only able to get snkkt ramp shots on the fly. Also, I feel like the target is still overlapping the metal ball guide just a tad. I really don't like the idea of drilling new holes to reposition farther from the guide. Anyways, that's what I'm living with.
[quoted image]
Just about to do the Snikt antisway install - any gotchas I need to watch out for? My PBL antisway kit didn''t come with any foam or parts other than the metal bracket - do I need any extra parts to make the swap?
1 week later
1 year later
Promoted items from Pinside Marketplace and Pinside Shops!
Fort Lauderdale, FL
You're currently viewing posts by Pinsider junglist.
Click here to go back to viewing the entire thread.
Reply
Wanna join the discussion? Please sign in to reply to this topic.
Hey there! Welcome to Pinside!
Donate to PinsideGreat to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
