You're currently viewing posts by Pinsider bowtech.
Click here to go back to viewing the entire thread.
Quoted from bent98:I wanted to share this collaboration between Cleland and myself. Many thanks to Cleland for doing such an amazing job editing my song selections so they sound as seamless as possible in game. Without him this project wouldn’t have come to fruition. You rock!! This is strictly a music mod as changing out all the in game speech with Ryan Reynolds is impossible and to have a handful of his quotes mixed in just doesn't sound consistent and therefore is not something that will be implemented. I know technologies like DeepFakes are allowing you to emulate someone’s voice so maybe one day we can convert the existing speech sounds to sound like Ryan.
Below is a link to a direct .IMG file that needs to be flashed to a new SD card. Essentially, you are writing the .IMG file to the SD card and then swapping it out in your game.
The main benefit is you can keep your original SD card with the stock code and just swap out a new 8gb+ card with this custom firmware flashed and retain the stock card as backup in the event something gets corrupt. 8gb-32gb sizes work fine.
Below is a link to a direct .IMG file that needs to be flashed to a new SD card. Essentially, you are writing the .IMG file to the SD card and then swapping it out in your game.
The main benefit is you can keep your original SD card with the stock code and just swap out a new 8gb+ card with this custom firmware flashed and retain the stock card as backup in the event something gets corrupt. 8gb-32gb sizes work fine.
If you have a Mac you can use a free program called DD utility. If you have a PC, you can use Etcher. https://www.balena.io/etcher/
The code is based off v1.02 and currently is for LE/Prem's. If there's enough request either myself or Cleland can do a Pro version.
Please use Rarlabs utility to extract after downloading. https://www.rarlab.com/
Whats changed:
Shooter Grove music: 2 of the 4 songs have been replaced with:
Howlin for you - Black Key's (Instrumental)
Florida - GDFR (Instrumental)
HellHouse music: 4 of 5 sounds have been replaced with:
Diplo - welcome to the Party
Dj Shadow - Nobody speak
Salt-N-Pepa - Shoop
DMX - X Gon Give it to ya
Disco ball mode music replaced with:
Rupert Holmes - Escape (The Piña Colada Song)
Merc Suit Multiball mode music replaced with:
SKRILLEX - Bangarang
Game over music: 1 of 5 sounds replaced with the following:
Teamheadkick - Deadpool Rap
Head over to this thread for the latest update:
https://pinside.com/pinball/forum/topic/deadpool-music-replacement-mod-
I hope you all enjoy!
Regards,
Bent98 and Cleland.
Please, please, please, make this available for the pro!
Quoted from VonPinball:+eleventybillion
see...eleventybillion people cant be wrong
Quoted from bent98:I wanted to share this collaboration between Cleland and myself. Many thanks to Cleland for doing such an amazing job editing my song selections so they sound as seamless as possible in game. Without him this project wouldn’t have come to fruition. You rock!! This is strictly a music mod as changing out all the in game speech with Ryan Reynolds is impossible and to have a handful of his quotes mixed in just doesn't sound consistent and therefore is not something that will be implemented. I know technologies like DeepFakes are allowing you to emulate someone’s voice so maybe one day we can convert the existing speech sounds to sound like Ryan.
Below is a link to a direct .IMG file that needs to be flashed to a new SD card. Essentially, you are writing the .IMG file to the SD card and then swapping it out in your game.
The main benefit is you can keep your original SD card with the stock code and just swap out a new 8gb+ card with this custom firmware flashed and retain the stock card as backup in the event something gets corrupt. 8gb-32gb sizes work fine.
Below is a link to a direct .IMG file that needs to be flashed to a new SD card. Essentially, you are writing the .IMG file to the SD card and then swapping it out in your game.
The main benefit is you can keep your original SD card with the stock code and just swap out a new 8gb+ card with this custom firmware flashed and retain the stock card as backup in the event something gets corrupt. 8gb-32gb sizes work fine.
If you have a Mac you can use a free program called DD utility. If you have a PC, you can use Etcher. https://www.balena.io/etcher/
The code is based off v1.02 and currently is for LE/Prem's. If there's enough request either myself or Cleland can do a Pro version.
Please use Rarlabs utility to extract after downloading. https://www.rarlab.com/
Whats changed:
Shooter Grove music: 2 of the 4 songs have been replaced with:
Howlin for you - Black Key's (Instrumental)
Florida - GDFR (Instrumental)
HellHouse music: 4 of 5 sounds have been replaced with:
Diplo - welcome to the Party
Dj Shadow - Nobody speak
Salt-N-Pepa - Shoop
DMX - X Gon Give it to ya
Disco ball mode music replaced with:
Rupert Holmes - Escape (The Piña Colada Song)
Merc Suit Multiball mode music replaced with:
SKRILLEX - Bangarang
Game over music: 1 of 5 sounds replaced with the following:
Teamheadkick - Deadpool Rap
Head over to this thread for the latest update:
https://pinside.com/pinball/forum/topic/deadpool-music-replacement-mod-
I hope you all enjoy!
Regards,
Bent98 and Cleland.
Just reiterating please make this happen for us pro owners!
Anyone know which wire is + and which is - at the subwoofer? I want to add an external sub now with this sound replacement and I can't find it in the online manual that is online.
Can anyone show me the link to the snik bracket on pinball life? I can't seem to find it. And I am assuming it is to correct the pad from tilting over.
Quoted from maffewl:I literally just finished installing it. Super easy. take out the 2 screws to remove the target. Take out the two screws that hold the target together. Put it back together in reverse. Just make sure you have target pads on hand, or order some. It does not come with a pad installed.
What do mean target pads? Is there something else I need to replace with the bracket? Just ordered my bracket last night.
Quoted from PinMonk:Just move the foam backing from the old target bracket to the new one, or cut a piece of adhesive-backed foam weatherstrip if you ruin it taking it off.
Thanks for the heads up!
Shaker question, a friend of mine picked me one up when he went to get his new game. I thought it was and OEM o e but turned out to be a pinball life one. My question us this, when does your shaker go off? Mine only seems to work in battle modes. I have it set to Max and in reading through the posts some say they had to turn theirs off or down because it shook so much. If I didn't tell you I had one you might not even notice it.
Quoted from punkin:I just did the bottom of the playfield, slings etc when i did mine. I put the spotlights, trough lights and lighted flipper buttons in at the same time.
Got a rubber kit coming too, 13 months old and the sling rubbers are about to break.
I have the comet light kit and am try to install the spot lights but the hole is too small to fit on the post they sent me. Am I doing something wrong?
Quoted from EternitytoM83:I had the same issue and thought I was going crazy. Contact Comet, they had a batch of spotlights with the wrong size bracket. They got replacements to me very fast.
Bummer. Thanks for the heads up. I sent them a message.
Quoted from maffewl:I use a shooter lane protector on my Stern games. Much better than mylar and prevents chipping (which mylar won’t).
https://cointaker.com/products/pinball-shooter-lane-protector
There are several sites that sell these. The link attached is for reference.
I have these on all my games, I love them.
You're currently viewing posts by Pinsider bowtech.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/deadpool-owners-club-free-chimichangas-for-all?tu=bowtech and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.