(Topic ID: 222766)

Deadpool owners club. Free chimichangas for all.


By Ericc123

11 months ago



Topic Stats

  • 3,721 posts
  • 358 Pinsiders participating
  • Latest reply 8 hours ago by Peanuts
  • Topic is favorited by 144 Pinsiders

You

Linked Games

Topic Gallery

There have been 831 images uploaded to this topic. (View topic image gallery).

0F788517-B10A-4AA3-A5BB-0B5448AE572F (resized).jpeg
A1C844E9-544E-4183-8C2E-69FC2260CC3A (resized).jpeg
71950619-C60C-4AC8-9903-CE3E37D7D803 (resized).jpeg
FF106CFE-8EF5-4939-BB78-8F88B853B031 (resized).jpeg
A770DF39-33E7-406A-96A5-E5D3CF0B8185 (resized).jpeg
3FEBBFDD-A37C-46A2-9E05-C5CF095901A0 (resized).jpeg
87B83D3E-F59A-468B-A269-7F1BF1653822 (resized).jpeg
8D2F0526-A5E9-4233-9A4F-CB076A996A07 (resized).jpeg
CA97DD1D-2547-422F-B28C-1FD9380FC48B (resized).jpeg
4B926E9D-C01C-4178-ACA5-B34FE3474EE6 (resized).jpeg
1D7CD8AC-E1FA-423D-ACBB-FD51DA242F3D (resized).jpeg
IMG_20190615_202347 (resized).jpg
IMG_20190613_171927 (resized).jpg
0A4C5F39-43A5-43F1-8569-E04E0F7FBE51 (resized).jpeg
F13E5E14-6525-488C-AC52-B2685CBF6940 (resized).jpeg
20190708_181053 (resized).jpg

Topic index (key posts)

30 key posts have been marked in this topic, showing the first 20

Post #264 Disco Ball (for Pro machines) by Lermods Posted by Lermods (10 months ago)

Post #270 Troubleshooting the Katana ramp shot Posted by chuckcasey (10 months ago)

Post #385 Tilt Graphics art blades - installed with photos Posted by jeep-mustang (10 months ago)

Post #414 Deadpool Rulesheet - 1.02 Posted by jeep-mustang (10 months ago)

Post #544 Post Rubbers wearing Posted by HighProtein (9 months ago)

Post #638 Cliffy's - Installed with photos Posted by cpr9999 (9 months ago)

Post #646 Bright silver powdercoat for Katana Posted by Robertstone0407 (9 months ago)

Post #725 External Subwoofer Hook-up Posted by _xizor (9 months ago)

Post #889 Deadpool "HELLHOUSE" villains lair by The Mod Couple Posted by Yelobird (8 months ago)

Post #894 Comet GI lighting upgrade - installed with photos Posted by Melhadmj (8 months ago)

Post #1032 Post Rubbers - Not installed by default (George's decision) Posted by Marcdaddy (8 months ago)

Post #1078 Snikt Target Adjustment Photos - Instructions in post #1081 Posted by Robertstone0407 (8 months ago)

Post #1092 Deadpool "ChimiFire" flaming truck Mod by The Mod Couple Posted by Yelobird (8 months ago)

Post #1305 Disco Multiball - Premium/LE instructions Posted by nicknack66 (7 months ago)

Post #1408 Color Bracket mods for inserts by Pin Monk Posted by vireland (6 months ago)

Post #1504 Disco Loop Reject/Airball fix Posted by cpr9999 (6 months ago)

Post #1689 Drop Bank Issues - Check here Posted by Ferrone (5 months ago)

Post #1867 Deadpool Pro with Katana side armor installed Posted by StoneyFL (4 months ago)

Post #2147 Disco Ball (for Pro machines) by Hooked on Pinball Posted by HOOKED (3 months ago)

Post #2155 Stern Ninja Star bumper cap kit Posted by twenty84 (3 months ago)


Topic indices are generated from key posts and maintained by Pinside Editors. For more information, or to become an editor yourself read this post!

You're currently viewing posts by Pinsider _xizor.
Click here to go back to viewing the entire thread.

#723 9 months ago

Anyone add a sub yet? (I know it’s overkill)

Don’t quite have it setup properly yet, but getting a little extra on the low bass even adds more omph to the music.

Loving this pin!

B070E665-9F03-41E3-8EB5-BB96ECC17B78 (resized).jpeg

#725 9 months ago
Quoted from cpr9999:

Can pinsiders show us - take pictures of how to hook up sub?
Thx

I just made a cable using alligator clips and a single RCA male cable.

Cut off one end of RCA cable, there is an insulated wire (+) and a bare wire (-). Strip RCA cable so you can soldier an alligator clip to each.

Add heat shrink to both cables, soldier each alligator clip to both (+) and (-) of the RCA cable. Use a multimeter to continuity test to make sure it works as expected.

Then hook the alligator clips up to the woofer in the bottom of cabinet. The (-) goes to the Yellow/Black wire on woofer. (+) to Yellow.

Run wire through holes in back of cabinet to sub.
0ABD3E1A-67A8-4294-A6EE-4F1F8B82EE6B (resized).jpeg

#728 9 months ago
Quoted from cpr9999:

What make/model sub do you all use?
Not looking to break bank, something that is good enough.

Polk Audio PSW10 or similar is good.

2 months later
#1367 6 months ago

- DISCO MULTIBALL scoring boosted.

Damn skippy!

Promoted items from the Pinside Marketplace
$ 5,799.00
Pinball Machine
Flip N Out Pinball
$ 279.95

You're currently viewing posts by Pinsider _xizor.
Click here to go back to viewing the entire thread.

Hey there! Got a moment?

Great to see you're enjoying Pinside! Did you know Pinside is able to run thanks to donations from our visitors? Please donate to Pinside, support the site and get anext to your username to show for it! Donate to Pinside