You're currently viewing posts by Pinsider Ferrone.
Click here to go back to viewing the entire thread.
Hi Gang,
Has anyone had issues with little Deadpool 3 bank drop targets? The ball gets stuck behind them and won’t release for the multiball when hitting the targets! I did an opto switch test, coil drop target test, checked pin plugs and all is good, can seem to find the problem? Got me stumped! Is it software related maybe?
I did see that post with similar issue. I have noticed that my drop targets are clear from the playfield - it’s not touching. Weird coz never had this issue before only when plug is loose. I’ll keep looking into it. Thanks guys!
Okay Gang, found the problem and it looks like the issue may come up for others in due course (and I hope not!). I believe its a silly mechanism in the 3 bank drop target assembly - possibly design fault?
There is a think angle plate that is triggered by the same coil near the playfield. This plate has 3 nibs that when triggered hit the 3x drop targets so they can drop. In my case, my plate has moved away from the small coil, so when the coil pulses it can't move the plate so the targets do not drop. We played around with it and there seems to be some slack in the way its made, which makes me think may happen again down the track? Play around with the plate so that it is closer to the small coil and also that this plate is not rubbing against the assembly in any way. It never was a software issue or fault opto.
Photo below outlines the plate in question. good luck! Let me know if it fixes your problem - fingers crossed!!!!
Dan
IMG_3141b (resized).jpgYou're currently viewing posts by Pinsider Ferrone.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/deadpool-owners-club-free-chimichangas-for-all?tu=Ferrone and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.