Deadpool (Limited Edition)
Stern, 2018
Deadpool (Premium)
Stern, 2018
Deadpool (Pro)
Stern, 2018Quoted from GeekedOnPinball:Has anyone had their premium powder coated in the same style as the limited edition with the beautiful gold flakes? I would love to see pictures.
[quoted image][quoted image]
I did, very very happy with it... check post 11,665 in this thread.
Quoted from J_Striker:Anyone else done any powder work on their premium? I am getting mine soon and looking to see examples
[quoted image][quoted image]
Search the thread for 'powder' or browse the gallery. You'll find a bunch.
Quoted from CashMoney:I wish pinball life would get their mirror blades back in stock… those are the easiest to install and don’t require and screws. Guess I’ll just keep waiting.
Hard for me to imagine anything easier than the Cointaker ones I just installed. Took 5 minutes.
Quoted from Purdue:Anybody seen this type of plug in a node board. This is on my 2021 premium in the apron node board where insider goes…
Is it just a dummy?[quoted image][quoted image][quoted image]
I hope so, I threw mine out when I installed ic and used that jack
Quoted from punkin:Looks like an aerial to me. maybe for a remote or somesuch
What’s is an aerial if you don’t mind. It came this way from stern, definitely interesting.
Quoted from Purdue:What’s is an aerial if you don’t mind. It came this way from stern, definitely interesting.
noun
1.
BRITISH
a rod, wire, or other structure by which signals are transmitted or received as part of a radio or television transmission or receiving system.
Perhaps you call it an antenna?
Quoted from punkin:noun
1.
BRITISH
a rod, wire, or other structure by which signals are transmitted or received as part of a radio or television transmission or receiving system.
Perhaps you call it an antenna?
hah yep!
At first i wondered if it were a wifi antenna. but it just appears to be a crimped off patch cord
Quoted from Purdue:hah yep!
At first i wondered if it were a wifi antenna. but it just appears to be a crimped off patch cord
Ok, just seems like an exe way to do it when a plastic plug would have done.
Quoted from daveddd14:So my DP Premium is here and I am ordering mods. Are both the Lucxor katana handle & HOOKED pop cap throwing stars both out of stock?
Man, if you want mods order a pinwoofer kit, comet lighting and invisiglass.
Quoted from punkin:Man, if you want mods order a pinwoofer kit, comet lighting and invisiglass.
Shaker, Mirrored Side Art, and Comet Kit all ordered. Won't be playing a ton in the summer so will hopefully pick up the glass in person later this year.
Quoted from Purdue:Anybody seen this type of plug in a node board. This is on my 2021 premium in the apron node board where insider goes…
Is it just a dummy?[quoted image][quoted image][quoted image]
It’s a terminator.
“Terminator is a device connected to one end of a bus or cable that absorbs signals”
Quoted from bigguybbr:I just had one of the legs on the microswitch snap off for the hell house hole. It seems like any of the VUK switches on Marco and pinball life are out of stock. Anyone know where I can find a replacement?
As I grew impatient waiting for a replacement microswitch for the hell house scoop, I remembered I had some of the old buttons from an arcade 1up cab I modded, and those have micro switches. I was able to swap over the P shaped switch arm and it installed without any issues into the game. The tension is greater than the stock ones, but it’s fine for a scoop. I wouldn’t use it on a roll over switch.
9CAA392A-F3B9-4538-84A7-50720787DECC (resized).jpegQuoted from TopMoose:Tonight I got the Sparkly Unicorn Award! (I think that’s what Lil’ Deadpool called it)
Has anyone else come across this?
It's ace! The unicorn is part of one of the later Lil DP modes. Bounce i think. You hit the shut gates heaps of times, then they open and you hit the targets a couple times to get magic unicorn poo.
Animation is nearly as good as mech or disco.
Quoted from punkin:It's ace! The unicorn is part of one of the later Lil DP modes. Bounce i think. You hit the shut gates heaps of times, then they open and you hit the targets a couple times to get magic unicorn poo.
Animation is nearly as good as mech or disco.
Yes! I think I had to hit the moving lit shot four times, then hit Lil' Deadpool to lock the ball. The reward is 50 million points plus an increased playfield multiplier for the rest of the game. Not ignoring the mini-modes pays off!
Is everyone protecting their playfields with washers?
I put them under the left ramp, the hot under that ramp, wolverine shot, and behind little Deadpool.
Quoted from Trekkie1978:Is everyone protecting their playfields with washers?
I put them under the left ramp, the hot under that ramp, wolverine shot, and behind little Deadpool.
I didn't add anything. I opened my Premium last week. Put a piece of mylar in the shooter lane and got it setup just in time for graduation weekend and let everyone play it. I do have some interesting audit numbers after the weekend that don't make sense. Wish I would have looked quick before the weekend.
Screen Shot 2022-06-13 at 8.47.27 AM (resized).png
Edit: Now I just have to find time to add shaker, shooter rod, side art, katana handle, and speaker upgrade before I really start playing it 
Quoted from Trekkie1978:Is everyone protecting their playfields with washers?
I put them under the left ramp, the hot under that ramp, wolverine shot, and behind little Deadpool.
Never had to do anything to my pro and it's 3 years old and has over 5k games.
Quoted from bigguybbr:I got mine used, so no playfield protector. I have heard they change the way the game plays, so I have never looked into one.
Playfield protector?
Quoted from punkin:Playfield protector?
[quoted image]
[quoted image]
LOL! I blame the Nyquil I just took. My brain isn't working lol
Quoted from punkin:Never had to do anything to my pro and it's 3 years old and has over 5k games.
Have you ever lifted your ramp or removed the wolverine/katana ball guide and plastics back there? If not you might have some surprises, but you may also be fortunate that your machine does not to have any of these issues.
Quoted from Smack:Have you ever lifted your ramp or removed the wolverine/katana ball guide and plastics back there? If not you might have some surprises, but you may also be fortunate that your machine does not to have any of these issues.
Never lifted it, but have kept an eye on it. If it's worn where i can't see it, then it doesn't exist.
Quoted from J85M:Should hopefully have replacement right apron plastics ready to go this coming week.
J85M Any Updates?
Quoted from Purdue:Anybody seen this type of plug in a node board. This is on my 2021 premium in the apron node board where insider goes…
Is it just a dummy?[quoted image][quoted image][quoted image]
It's interesting it's not mentioned in the Premium DP manual but I found it listed on the Led-Zeppelin manual: (terminator plug 045-5315-00). Guess Stern hasn't updated the manual for the Insider connection.
dp_prem (resized).pngZP_manual (resized).png
Quoted from bigguybbr:It’s a terminator.
“Terminator is a device connected to one end of a bus or cable that absorbs signals”
Quoted from revoke:It's interesting it's not mentioned in the Premium DP manual but I found it listed on the Led-Zeppelin manual: (terminator plug 045-5315-00). Guess Stern hasn't updated the manual for the Insider connection.
[quoted image][quoted image]
Called it. Back in high school (in the 90s), we used twist off the terminator from the secretaries office computer and bring down the coax network they used. That’s probably some sort of cyber crime these days.
Quoted from wolffcub:Wanted to go back to playing so for now I just painted the end silver until I have a chance to finish the cap. Took a few min and fixed up the wrap to properly follow the red cutouts.
[quoted image][quoted image]
Do you have instructions or anything on how to wrap this design?
Quoted from Walk:Do you have instructions or anything on how to wrap this design?
go left to right
right to left
left to right
right to left
left to right
right to left
left to right
right to left
left to right
right to left
left to right
Quoted from wolffcub:go left to right
right to left
left to right
right to left
left to right
right to left
left to right
right to left
left to right
right to left
left to right
lmao. Perfect. Thanks.
Quoted from Walk:lmao. Perfect. Thanks.
I will make make a new handle design that I can print so I don't need a factory one. I will make a small run when I have time later, if there is any interest.
Quoted from bigguybbr:Called it. Back in high school (in the 90s), we used twist off the terminator from the secretaries office computer and bring down the coax network they used. That’s probably some sort of cyber crime these days.
Lol that's hilarious, good ole bus topology. Always had a kid in our group that would slightly pull out the SCSI terminators to try and mess with the printers but not make it visibly obvious it was a cabling issue.
Don't think there's a need for a terminator on RJ45 unless you're running some other type of signal over the cable (which I doubt is happening here.) Out of curiosity I emailed Stern technical support to ask about it and they confirmed it's just a filler plug to protect the port from damage/debris. Beats a rubber insert that could fall out from playfield vibration/movement.
Quoted from revoke:Lol that's hilarious, good ole bus topology. Always had a kid in our group that would slightly pull out the SCSI terminators to try and mess with the printers but not make it visibly obvious it was a cabling issue.
Don't think there's a need for a terminator on RJ45 unless you're running some other type of signal over the cable (which I doubt is happening here.) Out of curiosity I emailed Stern technical support to ask about it and they confirmed it's just a filler plug to protect the port from damage/debris. Beats a rubber insert that could fall out from playfield vibration/movement.
SCSI is pronounced “Scuzzy” for all of you too old/young to to have enjoyed getting to make innuendos about dirty scsi ports back in the day
Quoted from wolffcub:go left to right
right to left
left to right
right to left
left to right
right to left
left to right
right to left
left to right
right to left
left to right
Then what? There's still another inch.
Quoted from daveddd14:J85M Any Updates?
Sorry this got put on the back burner for other stuff, but yes I have everything ready I will get a couple made and post pictures maybe this weekend, work dependant.
I noticed in the Stern Insider achievements there is a section for Wooly Mammoth. Anybody know how to get to a Wooly Mammoth in the game? I don't believe I have ever seen it.
Quoted from yemons:I noticed in the Stern Insider achievements there is a section for Wooly Mammoth. Anybody know how to get to a Wooly Mammoth in the game? I don't believe I have ever seen it.
The wooly mammoth was cut from the game along with the kraken believe both where originally set to be modes/featured in the game.
If you read the achievements they relate to the T-Rex or Megladon.
Add me to the group. Waited patiently for this and it’s finally here. Love it. Got a cool surprise too - George autographed it! Not sure if they are extras from LE run years ago or he just surprises a few owners here and there but pretty cool! As far as issues - glass is fine but menu buttons barely work. Born May 13th, 2022.
6012CCC0-55E0-48BA-8D3E-FCF4FCC9CEB2 (resized).jpeg89C80BAF-01CD-4A1D-A71D-1803806BAD9C (resized).jpeg90A1E25E-1B14-4144-B8B9-0FB1851FF752 (resized).jpegE38F0047-A8CE-488A-A5FB-A211AD80A6B1 (resized).jpegQuoted from yemons:I noticed in the Stern Insider achievements there is a section for Wooly Mammoth. Anybody know how to get to a Wooly Mammoth in the game? I don't believe I have ever seen it.
I just checked my IC account since I knew I had it
80643288-BAAD-490C-BBF9-AE149563C214 (resized).jpeg
Quoted from daveddd14:J85M Any Updates?
Here we go mate, no pixelation what so ever, white areas are simply the light reflecting back off the artwork, printed from a source file, so no dodgy scans or JPEG’s off the net etc, I wanted it to look as close to factory as possible.
Quoted from Dalewin:Add me to the group. Waited patiently for this and it’s finally here. Love it. Got a cool surprise too - George autographed it! Not sure if they are extras from LE run years ago or he just surprises a few owners here and there but pretty cool! As far as issues - glass is fine but menu buttons barely work. Born May 13th, 2022.
[quoted image][quoted image][quoted image][quoted image]
Yeah, thats awesome congrats!
George mentioned on the Super Awesome pinball podcast that he autographed some deadpools recently. Congrats again!
Quoted from J85M:Here we go mate, no pixelation what so ever, white areas are simply the light reflecting back off the artwork, printed from a source file, so no dodgy scans or JPEG’s off the net etc, I wanted it to look as close to factory as possible.
[quoted image]
This looks great, I’m in!
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/deadpool-owners-club-free-chimichangas-for-all/page/266?hl=mbl1116 and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Sun City, AZ
Woolgoolga
Victoria, BC
Warrington