Any Deadpool owners have the side armor. I am trying to see what it looks like actually installed on a machine. If someone can post a picture that would be great. Thank you
Any Deadpool owners have the side armor. I am trying to see what it looks like actually installed on a machine. If someone can post a picture that would be great. Thank you
Quoted from Rizmo:Any Deadpool owners have the side armor. I am trying to see what it looks like actually installed on a machine. If someone can post a picture that would be great. Thank you
Best I could do because I have it sandwiched between the wall and my Godzilla Premium.
726D0D2B-4938-48CA-BCD3-EB32E817C8B6 (resized).jpeg980B1431-948D-4855-B601-EBB0A0861F66 (resized).jpegBD2E7C09-3526-4FB3-841E-DAFE322C1812 (resized).jpegQuoted from TonyVrd:Best I could do because I have it sandwiched between the wall and my Godzilla Premium.
[quoted image][quoted image][quoted image]
That’s a great looking bullet mod
Thanks for the support Tony Vrd!
68A6EE08-4DFF-465D-BDD6-CBBCE4AA15F2 (resized).jpegQuoted from HooperTriplett:Time to re-read this whole thread - just paid my invoice for a Premium. Our first NIB, and I'm equal parts excited and nervous!
What run was it from? I’m on the next run but I thought it was June/July
Quoted from Happy81724:What run was it from? I’m on the next run but I thought it was June/July
That is when my Deadpool is coming to me. I am glad it is still a couple months out. I am working on my game room and its a total mess right now. A few months will give me time to get it all done. I can not wait, I have been ordering mods.
Quoted from Happy81724:What run was it from? I’m on the next run but I thought it was June/July
Dunno. Was told I'd be invoiced when it was ready to ship, so I'm unsure if it's ready or part of an incoming allocation.
Quoted from drwicket:Anyone know if the illuminated combo pack is ever going to come back in stock at mezel mods? Or anyone know where I can get it somewhere else?
[quoted image]
Just get the translucents separately and then the comet smd strip, simple DIY...I would also upgrade the springs to the older bally version as the translucent plastic as a tendency to remain standing with hard impacts
http://pinball-mods.com/oscom/drop-target-stern-p-48.html?osCsid=390clid0ha5sr73c52tacasvh0
http://pinball-mods.com/oscom/drop-target-stern-p-48.html
Not sure where else you can find these, but a good source for just the drop targets
Quoted from fooflighter:Just get the translucents separately and then the comet smd strip, simple DIY...I would also upgrade the springs to the older bally version as the translucent plastic as a tendency to remain standing with hard impacts
http://pinball-mods.com/oscom/drop-target-stern-p-48.html?osCsid=390clid0ha5sr73c52tacasvh0
The plastic over my left ramp broke . Apparently it heavily guides that shot as now I am getting a ton of rejects. I contacted Stern but they said I had to go to the distributor. Does anyone happen to have one?
Quoted from Aniraf:The plastic over my left ramp broke . Apparently it heavily guides that shot as now I am getting a ton of rejects. I contacted Stern but they said I had to go to the distributor. Does anyone happen to have one?
This piece?
PXL_20220405_122401965 (resized).jpgSo walked into GameStop and purchased a Deadpool mystery box….. Paid off. Let’s just say lil’ Deadpool has company.
5960D3B3-9944-4C84-9F79-C0110C1C55DF (resized).jpeg67C4E40A-5EE3-4782-977A-74EAD466EF43 (resized).jpeg99FEB7A1-FD54-43C1-8A09-E7E57F245327 (resized).jpegD678EA08-1133-4317-921E-CFED5FE77BF8 (resized).jpegD7647691-6CC5-49E5-AC32-6DD1A277B4C8 (resized).jpegQuoted from hiker2099:So walked into GameStop and purchased a Deadpool mystery box….. Paid off. Let’s just say lil’ Deadpool has company.
[quoted image][quoted image][quoted image][quoted image][quoted image]
Unfortunately that placement is directly blocking the spot from Dazzler on the Disco Ball
Quoted from Sleal16:This piece?
[quoted image]
That’s the one. Pinball life had them along with a clear protector. I can’t tell if they are making them or selling OEM because they are the only place in town not selling a whole set.
Quoted from Aniraf:That’s the one. Pinball life had them along with a clear protector. I can’t tell if they are making them or selling OEM because they are the only place in town not selling a whole set.
maffewl makes a metal one. I purchased mine from him and it's the best out there. Just in case you want another option.
https://pinside.com/pinball/market/classifieds/ad/100059
Check out his other mods too. His stuff is great
Quoted from Aniraf:That’s the one. Pinball life had them along with a clear protector. I can’t tell if they are making them or selling OEM because they are the only place in town not selling a whole set.
And if you don't want that, I can send you mine that I took off, but I would recommend his metal one.
Quoted from fooflighter:Unfortunately that placement is directly blocking the spot from Dazzler on the Disco Ball
Nah, Disco is better now. Deadpool gets to dance in the light off the ball. It’s really cool every time you hit the ramp his head starts bobbling.
Quoted from Lateralus:maffewl makes a metal one. I purchased mine from him and it's the best out there. Just in case you want another option.
https://pinside.com/pinball/market/classifieds/ad/100059
Check out his other mods too. His stuff is great
Woah, shit! That is awesome. I am totally going to grab one of those! Ty for the offer on your stock one. I should be golden with the others I ordered from pinball life. Plus I’ll grab this metal one.
Quoted from Aniraf:Woah, shit! That is awesome. I am totally going to grab one of those! Ty for the offer on your stock one. I should be golden with the others I ordered from pinball life. Plus I’ll grab this metal one.
You're welcome. He's a really nice guy too. His mods are great - take a look. That metal one is the best out there, so hope you enjoy it.
Thanks for all you do as well. My Rush protector should be here any day now and I look forward to your other mods as well
Happy to help you.
Quoted from Lateralus:You're welcome. He's a really nice guy too. His mods are great - take a look. That metal one is the best out there, so hope you enjoy it.
Thanks for all you do as well. My Rush protector should be here any day now and I look forward to your other mods as well
Happy to help you.
Haha. So funny that I am now known across multiple threads because of the rush protector. If you can believe it, I have one for Deadpool as well. It doesn’t need it, but it sure looks awesome to have a red version of the protector on Deadpool. I can’t wait to scale enough that we can actually support the community in multiple areas!
Joined the club with a modded out Deadpool Pro last week. What a great game! I am surprised how much the shaker adds to this game. Made it to Mechalacrakalasouras rex for the first time last night. A pleasant surprise.
Quoted from Aniraf:The plastic over my left ramp broke . Apparently it heavily guides that shot as now I am getting a ton of rejects. I contacted Stern but they said I had to go to the distributor. Does anyone happen to have one?
How?
How many plays?
Great news...The next run of Deadpools were suppose to be in July/Aug. Herd on the podcast "The pinball show" it got bumped up to end of April and they pushed Jurassic Park back to July/Aug. Talked to my distributor. He talked with Stern and confirmed this. He said I should be getting it early May. Jurassic Park people are super pissed. I can not wait
I'm so excited about the date moving up! Deadpool is gonna be my first pin and I ordered some Pin Stadiums ahead of time because of their TPF sale. Now that the dates moved up I've gotta get a shaker motor too!
Quoted from PfRedflyer:I'm so excited about the date moving up! Deadpool is gonna be my first pin and I ordered some Pin Stadiums ahead of time because of their TPF sale. Now that the dates moved up I've gotta get a shaker motor too!
Same here it will be my first pin as well. Is that sale still going on? I dont see it for sale on their site
Quoted from PfRedflyer:I'm so excited about the date moving up! Deadpool is gonna be my first pin and I ordered some Pin Stadiums ahead of time because of their TPF sale. Now that the dates moved up I've gotta get a shaker motor too!
Snap!
Was mine too. be careful though, within 2.5 years i had 26 of the things.
Expecting an early-May Premium as well, pretty stoked at the production being moved up! Never would have expected to get my first and second NIB in less than four months, gonna have to give the wallet a serious break after this one.
Quoted from PfRedflyer:I'm so excited about the date moving up! Deadpool is gonna be my first pin and I ordered some Pin Stadiums ahead of time because of their TPF sale. Now that the dates moved up I've gotta get a shaker motor too!
Quoted from Rizmo:Great news...The next run of Deadpools were suppose to be in July/Aug. Herd on the podcast "The pinball show" it got bumped up to end of April and they pushed Jurassic Park back to July/Aug. Talked to my distributor. He talked with Stern and confirmed this. He said I should be getting it early May. Jurassic Park people are super pissed. I can not wait
Exciting news! I ordered my Pro in June 2021. I was told September, which got bumped to January, which got bumped to July. No word from my distributor yet, but I'm glad to hear that it could be very soon.
Quoted from Happy81724:I messaged my distributor to check on mine. If it’s that early than I better make room now!
Haha!! I'm the same. I recently picked up a Iron Maiden Premium, with my parked Deadpool Premium money... "sadly", Iron Maiden has become an instant fav at home... I need to find some money fast!!... and space haha.
Quoted from Flynnyfalcon:Haha!! I'm the same. I recently picked up a Iron Maiden Premium, with my parked Deadpool Premium money... "sadly", Iron Maiden has become an instant fav at home... I need to find some money fast!!... and space haha.
I have checked to see how much pinballs are in Australia and ughhh lol. The wife would never let me own one if I had to pay those prices. I would say you have 2 kidneys, studies have shown you can live with one. Your best bet is to find someone who needs one and say, "Straight up trade kidney for a pinball machine." You both get something you really want. It is a win/win all around.
Has anyone ever done a teal powder coat? I was going through archives yesterday and saw lime green which I almost like but not quite.
Red powder coat is just a bit too much red for me.
Quoted from greenhoody:Has anyone ever done a teal powder coat? I was going through archives yesterday and saw lime green which I almost like but not quite.
Red powder coat is just a bit too much red for me.
I have not seen teal yet. I would think teal would look nice on a Premium. I have a pro coming to me, I think i would go with a purple on mine.
Quoted from Rizmo:I have not seen teal yet. I would think teal would look nice on a Premium. I have a pro coming to me, I think i would go with a purple on mine.
Purple on pro looks amazing
Quoted from HighProtein:Almost at 40,000!
[quoted image]
And how is the game holding up? So much negativity as of late on stern quality control, but I’ve found with proper maintenance, games can look like new and work very well with few major issues/repairs for years…..
Quoted from greenhoody:Purple on pro looks amazing
Purple on the pro is my plan! Fingers crossed for my game arriving early May.
Quoted from JPloof:Purple on the pro is my plan! Fingers crossed for my game arriving early May.
We should get ours May. My distributor said early May. Im worried now. I have been working on my game room and its in shambles. I was planning for a July release. Now I have only about a month to complete it now. It will be a nice start to my game room.
Just get the translucents separately and then the comet smd strip, simple DIY... The ministry of pinball has clear targets
Quoted from mpdpvdpin:I was just having the game of my LIFE and Deadpool R E S E T after I surpassed 5 BILLION on ball 2. Do I kill myself orrrrrr? I beat Final Battle and everything. Had three extra ball ready to go. So…anyone ever had a reset issue on DP?
[quoted image]
I can't recall that ever happening in over 2600 plays.
Quoted from mpdpvdpin:I was just having the game of my LIFE and Deadpool R E S E T after I surpassed 5 BILLION on ball 2. Do I kill myself orrrrrr? I beat Final Battle and everything. Had three extra ball ready to go. So…anyone ever had a reset issue on DP?
[quoted image]
Shitty.....
Quoted from mpdpvdpin:I was just having the game of my LIFE and Deadpool R E S E T after I surpassed 5 BILLION on ball 2. Do I kill myself orrrrrr? I beat Final Battle and everything. Had three extra ball ready to go. So…anyone ever had a reset issue on DP?
[quoted image]
I had weird resets on this game out of the box. It ended up being the PSU. Basically there is a little potentiometer in there that adjusts the power out and it was ever slightly too low. I wouldn’t recommend messing with it unless you have a good micrometer and know exactly what voltage you need, but it did fix me right up.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/deadpool-owners-club-free-chimichangas-for-all/page/247?hl=jstoltz and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.