(Topic ID: 222766)

Deadpool owners club. Free chimichangas for all.


By Ericc123

9 months ago



Topic Stats

  • 2,974 posts
  • 314 Pinsiders participating
  • Latest reply 3 hours ago by Eskaybee
  • Topic is favorited by 117 Pinsiders

You

Linked Games

Topic Gallery

There have been 671 images uploaded to this topic. (View topic image gallery).

Deadpool1billion (resized).jpg
Screenshot_20190518-214615 (resized).png
Screenshot_20190510-211422 (resized).png
DSC_0013_25 (resized).JPG
DSC_0011_27 (resized).JPG
Screenshot_20190510-211551 (resized).png
DSC_0014_26 (resized).JPG
Screenshot_20190510-211646 (resized).png
15582015605092787118741241510253 (resized).jpg
A01EBD6F-C888-4D0F-BD58-7297CFDF6ED9 (resized).jpeg
20190515_132056 (resized).jpg
20190515_132107 (resized).jpg
Screenshot_20190514-000808_Facebook (resized).jpg
pasted_image (resized).png
A25A3797-9372-45DE-AB91-D7CB3459EF94.gif
20190513_125646 (resized).jpg

There are 2974 posts in this topic. You are on page 11 of 60.
#501 7 months ago

I order to print my Deadpool custom rules card in chrome vinyl for to check result:

a6fc4c335c59d9b1a798ffb4338c84b9fee682ce.jpg

Here is:

"Deadpool Custom Pinball Card - Rules" (STERN) printed in chrome vinyl with gloss protective lamination (photo 1)
https://www.zonaarcade.com/fotos/artes/Deadpool%20Custom%20Pinball%20Rules%20print1.jpg

"Deadpool Custom Pinball Card - Rules" (STERN) printed in chrome vinyl with gloss protective lamination (photo 2)
https://www.zonaarcade.com/fotos/artes/Deadpool%20Custom%20Pinball%20Rules%20print2.jpg
Deadpool Custom Pinball Rules print1.JPGDeadpool Custom Pinball Rules print2.JPG

*I take bigger screenshots and photos, click to enlarge images (and click again on display image mode if it is necessary) for avoid blur effect of pinside´s miniatures.

You can see design details of "Deadpool Rules Card" here:

https://pinside.com/pinball/forum/topic/deadpool-owners-club-free-chimichangas-for-all/page/5#post-4574838

I hope you like my card!

Regards

#502 7 months ago
Quoted from tonyoz:

Same boat as you, but at least the code will be more advanced by the time we get ours

I'd be more inclined to agree of it was a Gotg or BM66 code scenario..

#503 7 months ago

Owners, do your node boards have capacitor kits on them?

Also, LE owners does the shaker board have the kit?

Can someone post pictures of these areas on their bottom side of their playfield?

#504 7 months ago

Today’s project. Clear plastic Color LED disco ball. Hopefully I can have motion installed. Deadpool pro.

#505 7 months ago
Quoted from frankmac:

Today’s project. Clear plastic Color LED disco ball. Hopefully I can have motion installed. Deadpool pro.

That is super cool frankmac . Is that one of the disco ball kits or did you make yourself?

#506 7 months ago
Quoted from frankmac:

Today’s project. Clear plastic Color LED disco ball. Hopefully I can have motion installed. Deadpool pro.

Very nice!

#507 7 months ago
Quoted from Mikonos:

I order to print my Deadpool custom rules card in chrome vinyl for to check result:
[quoted image]
Here is:
"Deadpool Custom Pinball Card - Rules" (STERN) printed in chrome vinyl with gloss protective lamination (photo 1)
https://www.zonaarcade.com/fotos/artes/Deadpool%20Custom%20Pinball%20Rules%20print1.jpg
"Deadpool Custom Pinball Card - Rules" (STERN) printed in chrome vinyl with gloss protective lamination (photo 2)
https://www.zonaarcade.com/fotos/artes/Deadpool%20Custom%20Pinball%20Rules%20print2.jpg
[quoted image][quoted image]
*I take bigger screenshots and photos, click to enlarge images (and click again on display image mode if it is necessary) for avoid blur effect of pinside´s miniatures.
You can see design details of "Deadpool Rules Card" here:
https://pinside.com/pinball/forum/topic/deadpool-owners-club-free-chimichangas-for-all/page/5#post-4574838
I hope you like my card!
Regards

They look nice. Are you going to make them available for everyone?

10
#508 7 months ago

Thought I would post a few pics and video of my deadpool topper. . It is a one-of-a-kind topper. I won’t be making multiples of the topper for obvious licensing reasons.

.
The topper features multi levels with an inside/rear illumination, cut and illuminated bullet holes and strobing front lights. The inside illumination really allows the title to “pop” without washing out any of the artwork. I posted two videos. One with the strobing front illumination and one without. I really enjoyed creating this topper

3072B2EF-01DC-4D43-86F2-800395F8CF22 (resized).jpeg73C841B9-3CAF-433E-B0B1-404B623E0A33 (resized).jpegA4DC0A56-0D83-4471-9A6F-979A68CD3C42 (resized).jpegA96661C5-79D4-4676-90BF-CA8829DF628B (resized).jpegCF4DFB93-AFA7-4FD3-941C-32DC6A6C30D7 (resized).jpeg

#509 7 months ago
Quoted from cpr9999:

Owners, do your node boards have capacitor kits on them?
Also, LE owners does the shaker board have the kit?
Can someone post pictures of these areas on their bottom side of their playfield?

I want to help you. I do, but I was busy working and playing it.

Game is so damn fun. Love every shot. For some reason Gomez orbits are more fun to me than other orbits. I had fun pummeling Sabretooth, who is easily defeated by orbits.

#510 7 months ago
Quoted from Jodester:

Oops! Sorry Doug.
Any chance I could get the Lil Deadpool insert instead of the one listed on your site?

Yeah. Though it would have been better to e-mail and ask...I'm surprised I saw it here. I have one set in stock so I'll swap them in and refund the difference to your PayPal.

Doug (SpeakerLightKits.com)

#511 7 months ago
Quoted from cpr9999:

Owners, do your node boards have capacitor kits on them?
Also, LE owners does the shaker board have the kit?
Can someone post pictures of these areas on their bottom side of their playfield?

I see the zip tie spacer fix but no capacitor fix.

20180923_173953 (resized).jpg
#512 7 months ago
Quoted from xfassa:

I see the zip tie spacer fix but no capacitor fix.[quoted image]

Thanks - that makes 2 people that verified this. Must be fixed on the board or in software somehow.

11
#513 7 months ago

Got LE #12 !

20180922_152700 (resized).jpg
#514 7 months ago
Quoted from Habeboo:

Thought I would post a few pics and video of my deadpool topper. . It is a one-of-a-kind topper. I won’t be making multiples of the topper for obvious licensing reasons.
.
The topper features multi levels with an inside/rear illumination, cut and illuminated bullet holes and strobing front lights. The inside illumination really allows the title to “pop” without washing out any of the artwork. I posted two videos. One with the strobing front illumination and one without. I really enjoyed creating this topper

[quoted image][quoted image][quoted image][quoted image][quoted image]

Very nice

#515 7 months ago

Tech question.

Fired up my machine- went into diagnostic mode to check switches, lights and coils, etc.

All is good- EXCEPT:

When checking coils - I could not get coil 13 (up/down ramp hold) to make any noise.

Can someone else check this on their machine? Thanks!!!!!!!
(FYI I have an LE - not sure what this coil goes to)

#516 7 months ago

Going back to speaker lights for a minute. I'm looking for a red speaker light without the bells and whistles (no remote or dimming), just a red light. I used to buy mine from Pinball Bulbs and was very happy with them. However it doesn't appear their style has changed since the new Stern's came out. Anymore suggestions or does anyone know if the Pinball Bulbs work well in the new Stern's?

#517 7 months ago
Quoted from Habeboo:

Thought I would post a few pics and video of my deadpool topper. . It is a one-of-a-kind topper. I won’t be making multiples of the topper for obvious licensing reasons.
.
The topper features multi levels with an inside/rear illumination, cut and illuminated bullet holes and strobing front lights. The inside illumination really allows the title to “pop” without washing out any of the artwork. I posted two videos. One with the strobing front illumination and one without. I really enjoyed creating this topper

[quoted image][quoted image][quoted image][quoted image][quoted image]

That is awesome, great job! I hope so more topper options come along soon - yours is sweet!!

#518 7 months ago
Quoted from foxtj24:

They look nice. Are you going to make them available for everyone?

Hi foxtj24!

I would do a copy for you if you like this result. No problem!

This is not a normal printing, ok! It is a printing over chrome vinyl with an extra protective "gloss" lamination. It is not a normal paper. All whites are really mirror, not white colour.

If you want, wait to next week because I will order to print my "Free Play" card, it is a superior card, I think!

Here is my "Free Play" card:

https://pinside.com/pinball/forum/topic/deadpool-owners-club-free-chimichangas-for-all/page/4#post-4573783

Regards

#519 7 months ago
Quoted from trk12fire:

Going back to speaker lights for a minute. I'm looking for a red speaker light without the bells and whistles (no remote or dimming), just a red light. I used to buy mine from Pinball Bulbs and was very happy with them. However it doesn't appear their style has changed since the new Stern's came out. Anymore suggestions or does anyone know if the Pinball Bulbs work well in the new Stern's?

If you would like, I can send you a SPIKE 2 Speaker Light Kit set on red and not include the remote. It isn't as if you have to change the color to red each time you turn the game on. Set it and forget it. It will be on red every time the game is turned on.

As for Pinball Bulbs, I don't think their 3D printed frames will work well for a "fully lit grill" style SPIKE 2 speaker light solution. So it won't be as easy for them to copy them as my original Speaker Light Kits were. As it is, it appears that they are still using their same small rectangle 3D printed frames for their speaker lights (in SPIKE 2 games).

There is also Yelobirds Speaker Illumination Kit for Deadpool. It's always red and no remote (but it does have adjustable brightness) so it might be what you are looking for.

https://pinside.com/pinball/market/shops/1080-the-mod-couple/01868-deadpool-custom-speaker-illumination-kit-3d-boom-

ATTACHMENTS:

Top is Pinball Bulbs

Bottom is Speaker Light Kits

Doug (SpeakerLightKits.com)

Pinball Bulbs (resized).jpgSpeaker Light Kits (resized).jpg
10
#520 7 months ago

LE added!

20180922_181238 (resized).jpgDple (resized).jpeg
10
#521 7 months ago

296 in the house. Hope to get a few games on it tonight..

20180925_124320 (resized).jpg
#522 7 months ago
Quoted from Zukram:

296 in the house. Hope to get a few games on it tonight..
[quoted image]

Hi Zukram or Cjmjmm,

Can you check this in diagnostic mode under Coils:

Coil 13 (up/down ramp hold) - when you activate it - does it make any noise and do anything- like the rest of the coils?

Thanks

#523 7 months ago

To all the LE owners...now that you have one...would you do it again? Thinking of pulling the trigger on one without playing it.

#524 7 months ago
Quoted from bdaley6509:

To all the LE owners...now that you have one...would you do it again? Thinking of pulling the trigger on one without playing it.

Yes and yes!

#525 7 months ago
Quoted from bdaley6509:

To all the LE owners...now that you have one...would you do it again? Thinking of pulling the trigger on one without playing it.

Absolutely do it again, I really struggled on doing the Premium vs LE and while the price difference is significant I couldn't be happier with the choice. The HD glass, shaker, art blades, speaker lights are nice but I have to say - the cabinet art, power coat armor and playfield make for a beautiful pin - it's a looker and I am really enjoying playing it. Will only get better as code evolves in my humble opinion..

#526 7 months ago
Quoted from cpr9999:

Hi Zukram or Cjmjmm,
Can you check this in diagnostic mode under Coils:
Coil 13 (up/down ramp hold) - when you activate it - does it make any noise and do anything- like the rest of the coils?
Thanks

Tried it just now. No noise, or any movement that I could detect...

#527 7 months ago

Played a pro for the first time today. Been thinking about grabbing one to pimp out. Was focusing on Katana shot since that seems to be the complaint on shots and it was smooth on the machine I played. No problems repeating the shot. Not easy but not bad at all. Really like the art and look of the game. Thinking I’m going to grab one and see what I can do with the overall package.

#528 7 months ago
Quoted from cpr9999:

Hi Zukram or Cjmjmm,
Can you check this in diagnostic mode under Coils:
Coil 13 (up/down ramp hold) - when you activate it - does it make any noise and do anything- like the rest of the coils?
Thanks

I will have to see tonight. Sorry I am not in front of the game until later.

#529 7 months ago

I try to be very objective in everything. While the LE is downright STUNNING in person, it really probably isn’t worth the extra coin. I think this title falls into the Pro-is-the-way-to-go category. Esp a Pro w a cpl mods.

That said if you’re not super sensitive to the cash, then absolutely definitely get the LE, it’s a freaking spectacle.

#530 7 months ago

Just landed from Nitro Pinball in Canada Deadpool Pro

1E9F4415-8549-4E77-B275-3FF57A72C586 (resized).jpeg
#531 7 months ago

Deadpool Pro / Deadpool LE

Owners - please add your assessment- rating on Pinside of your Deadpool pinball play.

Put a quick +1 response that you have rated it on pinside.

Let’s see how many OWNERS we can get over the next week.

THX in advance!

#532 7 months ago
Quoted from bdaley6509:

To all the LE owners...now that you have one...would you do it again? Thinking of pulling the trigger on one without playing it.

Yes. There is something about this game that draws me in. Once the code is farther it will rise up the ranks. LE looks amazing. Wierd thing is I’m having more fun with it than my IMDNLE right now. Probably just cause it’s new.

15
#533 7 months ago
Quoted from ozno:

Wierd thing is I’m having more fun with it than my IMDNLE right now. Probably just cause it’s new.

It’s because Maiden, while unique, isn’t nearly as fun as pinside would have you believe. DP is fun and unique. Just one mans opinion.

#534 7 months ago

Unless I get an le. I think I’m just going to powdercoat a pro

#535 7 months ago
Quoted from Mrawesome44:

Unless I get an le. I think I’m just going to powdercoat a pro

Here ya go. Hit me up

20180821_172132 (resized).jpg20180828_185656 (resized).jpg20180828_185701 (resized).jpg20180828_185706 (resized).jpg20180923_183246 (resized).jpg
#536 7 months ago
Quoted from cpr9999:

Deadpool Pro / Deadpool LE
Owners - please add your assessment- rating on Pinside of your Deadpool pinball play.
Put a quick +1 response that you have rated it on pinside.
Let’s see how many OWNERS we can get over the next week.
THX in advance!

So you want us to rate a game that at the present isn't software complete, has bugs to work out? OK.

#537 7 months ago

Tune in!!

70D880C7-4242-478A-A49F-7498F554BA12 (resized).jpeg
#538 7 months ago
Quoted from frankmac:

Tune in!!
[quoted image]

I predict that someone from Stern will win.

#539 7 months ago

Isn’t Elwin’s nickname GOAT?

#540 7 months ago
Quoted from TomGWI:

Isn’t Elwin’s nickname GOAT?

That's what most people call him.

#541 7 months ago
Quoted from ATLpb:

It’s because Maiden, while unique, isn’t nearly as fun as pinside would have you believe. DP is fun and unique. Just one mans opinion.

My opinion is Maiden is one of the most fun pins I have ever played. It is no secret that most people hate the theme, and yet it rises up despite it, not because of it. DP is unique for sure.

#542 7 months ago

LE #201/500 in the house! It's my first pin and I'm super happy with it. Now to learn how to consistently nail that SNIKT! shot...

IMG_20180926_121925 (resized).jpgIMG_20180926_133652 (resized).jpg
#543 7 months ago

Anyone notice a near constant hum/noise coming from the speakers on their machine, almost sounds like the fan blowing on the power supply (just not as loud), but the sound is definitely coming from the speakers.. Wondering if there is even anything that can be done here other than call Stern..

#544 7 months ago

After almost a week post rubbers are showing wear...

20180926_154128 (resized).jpg

20180926_154221 (resized).jpg

So I upgraded...

20180926_155647 (resized).jpg

Replaced near pops and near lil deadpool.

20180926_154604 (resized).jpg

20180926_154552 (resized).jpg

#545 7 months ago
Quoted from HighProtein:

After almost a week post rubbers are showing wear...
[quoted image]
[quoted image]
So I upgraded...
[quoted image]
Replaced near pops and near lil deadpool.
[quoted image]
[quoted image]

Where did you get them?

#546 7 months ago
Quoted from HighProtein:

Después de casi una semana después, los cauchos muestran desgaste ...
[quoted image]
[quoted image]
Así que actualicé ...
[quoted image]
Reemplazado cerca de pops y cerca de lil deadpool.
[quoted image]
[quoted image]

how do you see the board and imsert after playing those balls? some problem as in ghostbuster? .marks on the board? Is the board protector necessary? Mine arrives in November.

#547 7 months ago

Has anyone put the missing rubbers on the outlane posts? Or is it better to leave off for faster play?

Also, pinball instruction cards - any custom ones out yet?

#548 7 months ago
Quoted from cpr9999:

Where did you get them?

Superband near pop bumpers.
Titan at lil deadpool.
Superband absorb more energy and titan have more bounce, so pick to your preference.

#549 7 months ago
Quoted from DugFreez:

If you would like, I can send you a SPIKE 2 Speaker Light Kit set on red and not include the remote. It isn't as if you have to change the color to red each time you turn the game on. Set it and forget it. It will be on red every time the game is turned on.
As for Pinball Bulbs, I don't think their 3D printed frames will work well for a "fully lit grill" style SPIKE 2 speaker light solution. So it won't be as easy for them to copy them as my original Speaker Light Kits were. As it is, it appears that they are still using their same small rectangle 3D printed frames for their speaker lights (in SPIKE 2 games).
There is also Yelobirds Speaker Illumination Kit for Deadpool. It's always red and no remote (but it does have adjustable brightness) so it might be what you are looking for.
https://pinside.com/pinball/market/shops/1080-the-mod-couple/01868-deadpool-custom-speaker-illumination-kit-3d-boom-
ATTACHMENTS:
Top is Pinball Bulbs
Bottom is Speaker Light Kits
Doug (SpeakerLightKits.com)
[quoted image][quoted image]

Turned out pretty good Doug!

Oh, joined the club with a pro.

20180926_203347[1] (resized).jpg
#550 7 months ago
Quoted from ATLpb:

It’s because Maiden, while unique, isn’t nearly as fun as pinside would have you believe. DP is fun and unique. Just one mans opinion.

I had my imdn pro for 2weeks. This thing and guardians is much more fun... just another opinion. I’ve owned every new Stern in last 15 yrs and I really don’t get the hype for that game.... it’s good to be sure but it ain’t THAT good.

Promoted items from the Pinside Marketplace
$ 5,799.00
Pinball Machine
Little Shop Of Games
$ 7,499.00
Pinball Machine
Great American Pinball
$ 8,999.00
Pinball Machine
Classic Game Rooms
$ 125.00
Cabinet - Toppers
Sparky Pinball
Trade
Machine - For Trade
Muskegon, MI
From: $ 5,799.00
Pinball Machine
Great American Pinball
$ 7,499.00
Pinball Machine
Operation Pinball
Wanted
Machine - Wanted
Greeley, CO
$ 69.95
Playfield - Toys/Add-ons
Hookedonpinball.com
$ 9,999.99
Pinball Machine
Little Shop Of Games
Wanted
Machine - Wanted
Pittsburgh, PA
$ 11.95
Playfield - Toys/Add-ons
ULEKstore
From: $ 20.00
Cabinet - Other
Rock Custom Pinball
From: $ 99.99
From: $ 40.00
Cabinet - Other
Rock Custom Pinball
$ 29.95
From: $ 20.00
Cabinet - Other
Rock Custom Pinball
$ 7,499.00
Pinball Machine
Little Shop Of Games
$ 119.95
Playfield - Toys/Add-ons
Hookedonpinball.com
From: $ 32.00
Playfield - Other
Pin Monk
From: $ 40.00
Cabinet - Other
Rock Custom Pinball
From: $ 100.00
Playfield - Toys/Add-ons
Lermods
Hey modders!
Your shop name here
There are 2974 posts in this topic. You are on page 11 of 60.

Hey there! Got a moment?

Great to see you're enjoying Pinside! Did you know Pinside is able to run thanks to donations from our visitors? Please donate to Pinside, support the site and get anext to your username to show for it! Donate to Pinside