Subbing as I have to add this to my new pro. Many thanks!
You're currently viewing posts by Pinsider maffewl.
Click here to go back to viewing the entire thread.
Do we have to rename the file before flashing to the SD card? Or, is it just unzip the .rar, flash to the SD with the etcher, and plug in?
Thanks for the reply. I tried it in Deadpool Pro. The version existing on the machine was 1.03. When installed, it updated Nodes 1, 8, 9 and then had errors. When I went to the service menu, it kept throwing up errors at these nodes. However, once it checked the nodes, it would say "no errors". But if I went back into the service menu, it would say errors at these nodes again. It also didn't give the "turning off 48V warning" and associated bong bong bong sound when I opened the door.
Quoted from bent98:I dont think it will wont work if you have a 1.03 firmware from the factory
Sorry for the noob question but it wouldn’t cause damage from trying would it?
It does work but will inactivate some of the node board and coin door switch functions. The difference between 1.02 and 1.03 is the coin door voltage switch was added. Can any of us send the 1.03 code (if there’s a way to get it from the machine) and have a version made?
Quoted from maffewl:It does work but will inactivate some of the node board and coin door switch functions. The difference between 1.02 and 1.03 is the coin door voltage switch was added. Can any of us send the 1.03 code (if there’s a way to get it from the machine) and have a version made?
Following up on this. Is it possible for us to get the 1.03 code to you so that we can use this awesome update?
You're currently viewing posts by Pinsider maffewl.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/deadpool-music-replacement-mod-?tu=maffewl and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.