Chicago, IL
We managed to pull 3 bill out of Deadpool, all the while fumbling some of the multiballs.
(Topic ID: 272082)
Linked Games
Foo Fighters (LE)
Stern, 2023-
Foo Fighters (Premium)
Stern, 2023
-
Foo Fighters (Pro)
Stern, 2023
-
The Mandalorian (LE)
Stern, 2021
-
The Mandalorian (Premium)
Stern, 2021
-
The Mandalorian (Pro)
Stern, 2021
Topic Gallery
Quoted from DeadFlip:We managed to pull 3 bill out of Deadpool, all the while fumbling some of the multiballs.
Doesn't ANYBODY Knock, Anymore!?
Some say I'm TOO good at pinball.
https://www.facebook.com/DeadFlip/posts/1737930419688103
Regina, SK
Quoted from DeadFlip:Some say I'm TOO good at pinball.
https://www.facebook.com/DeadFlip/posts/1737930419688103
That was EPIC! 
Rob
Quoted from DeadFlip:Some say I'm TOO good at pinball.
https://www.facebook.com/DeadFlip/posts/1737930419688103
Ha!
Too Funny
Quoted from DeathHimself:Lol,
Still loved your backdoor game all night. That was some great score with awesome saves
A LOT of backdoors last night.
Quoted from DeadFlip:A LOT of backdoors last night.
Yep, I just play 0.98 for the past two hours and no matter how much I tried to get to the backdoor from the front door I couldn't lol. You must have a flaking switch or opto maybe?
I think it would be cool if Lyman would randomized the garage multi-ball with either flipper button presses or spinner spins etc... rather then always WWMB, ZMB, AAMB sequence.
Great game, good times watching.
Tonight we'll be jammin' on TMNT's new 1.10 code on behalf of Stern Pinball and Nuclear Blast for ComiCon's virtual convention!
See you there... We have some TMNT PRO Translites to giveaway!
We go live at 6pm C.!
https://www.Twitch.tv/DeadFlip
Of course you played Elvira on a night I couldn’t join. 
will watch later for pro tips to get better on my machine.
Quoted from DeathHimself:I tried to get to the backdoor from the front door I couldn't lol. You must have a flaking switch or opto maybe?
It's an issue with the ball not feeding the left orbit cleanly when you shoot the house ramp. It happens a lot on my game too and the ball ends up bouncing into the back door skill shot lane. It would probably be a good idea to make sure the house ramp optos are working correctly. If one of those triggers and the ball enters the skill shot right away, it probably shouldn't award the secret.
Rob
Quoted from DeadFlip:Tonight we'll be jammin' on TMNT's new 1.10 code on behalf of Stern Pinball and Nuclear Blast for ComiCon's virtual convention!
See you there... We have some TMNT PRO Translites to giveaway!
We go live at 6pm C.!
https://www.Twitch.tv/DeadFlip
[quoted image]
I missed it, but will watch the replay. My LE doesn't arrive until next tuesday, but at least I am on holidays now
Rob
Quoted from Rob_G:I missed it, but will watch the replay. My LE doesn't arrive until next tuesday, but at least I am on holidays now
Rob
Man I love this game. It absolutely kicked my a$$ last night, but we managed to pull out one amazing game!
Made my day.
Quoted from snowy_owl:Stream was hilarious tonight. Jack really lost it several times Made my day.
I have gambling problem apparently. Haha
Tonight we’re going to play a “Transporter The Rescue” of unknown condition.
We know it turns on and flips, that’s good enough for me.
6PM C.
https://www.Twitch.tv/DeadFlip
Pinball #deadflip #retrogaming
38AA6B15-EF39-44DE-8856-89C1B33175BA (resized).jpeg4F06264B-A375-40DB-95E8-136441B3FDC6 (resized).jpegE14E5413-271F-48B9-84C3-9512CD7E8865 (resized).jpeg
Quoted from RipleYYY:transporter the rescue !
another way underated pinball, not often seen, not often played by mostly, and its pity as its for sure one of the best sys11, including very nice gimmick about the lightshow/sound, and a clever layout which force you to shoot everywhere on the PF if you wanna do well
mine should be leaving home this afternoon, i'm now thinking i'm making a big mistake... :/
but OK, not so much place here, than i have to make some turn around
haha ! nice
as said on FB, you have 14M to beat, factory settings, and no death save for me lol
good luck
Quoted from RipleYYY:haha ! nice
as said on FB, you have 14M to beat, factory settings, and no death save for me lol
good luck
Challenge accepted!
Quoted from guitarded:No Re-Starts!
wait...
Quoted from DeadFlip:Challenge accepted!
was harder than what you would thought
including hardware probs...
in fact, the key is to not miss (!!!) the 1M shoot when TRANSPORTER is at max, and of course in multiball when you're on PF X2 or X3, because next time to relight it, the timer is shorter and steps are going down more quickly, than even more the next time, and so on... that means, after 4 or 5 TRANSPORTER, its quite impossible to maximize it at 1M again
even if on yours, the upper flipper shoots more than well, making lots of turns in the bowl (well, way more than mine on a perfect shoot)
... good luck Jack 
PS : the PF multiplicator seems bugguy as even if you're keeping balls, its going OFF anyway (not sure what ROM you have, i think for what i remember reading that the L3 is OK, i did get the L2)
++
Quoted from snowy_owl:Wasn't able to tune in last night - How did transporter play?
It played great until one of the drops stopped registering, completely destroying any chance of multiball.
I'll get gavin over to work on all these soon!
Tonight we’re going to play a “Jungle Lord” of unknown condition.
6PM C.
http://Twitch.tv/DeadFlip
#pinball #deadflip #retrogaming #twitch
EeGnOIWWsAMA4P_ (resized).jpgEeGnOIWWkAAdihz (resized).jpgEeGnOItWkAAz5QQ (resized).jpgEeGnOI4XYAMNEJt (resized).jpgQuoted from DeadFlip:Tonight we’re going to play a “Jungle Lord” of unknown condition.
6PM C.
http://Twitch.tv/DeadFlip
Pinball #deadflip #retrogaming #twitch
[quoted image][quoted image][quoted image][quoted image]
Awesome! Looking forward to it.
Quoted from DeadFlip:Tonight we’re going to play a “Jungle Lord” of unknown condition.
6PM C.
http://Twitch.tv/DeadFlip
Pinball #deadflip #retrogaming #twitch
[quoted image][quoted image][quoted image][quoted image]
Oh good, it will “bring your profits back alive!” 
Quoted from UnholySpectacle:I came for Jungle Lord but stayed for the camera craziness and hand injuries.
Hahaha.
I’m always looking for something else to add to the stream.
We showed about ever dang camera angle that CANT work last night.
Thanks again to the folks at California Extreme and Zen Studios for allowing me to moderate their seminar, and allow me to chat about my homebrew.
Here is my talk, it's only 15 minutes, but lit a fire under my butt to finish my doc. Lets gooooo.
Quoted from snowy_owl:Is gavin going to come by anytime soon?
Yeah, gonna have him in soon to look at a few pins
It's been a minute since we visited the park.
We go live at 6pm C.!
https://www.Twitch.tv/DeadFlip
JP (resized).jpgQuoted from snowy_owl:No stream tonight, I guess?
The storm tore though Chicago knocking out power and internet.
Heya Pinheads, I made something for ya.
This is a "Pinball Sketch Template", and I use something very similar when I'm brainstorming pins.
This is a layered PSD with all the elements you need to lay a game out, roughly sketched, but accurate enough to keep the sketch close to the real thing.
I also included several popular title's layouts that you can turn on and off for shot reference. (All taken from their manuals)
Don't worry if you don't have Photoshop, there are a ton of free programs out there that can open and edit PSDs!
GIMP for example.
Here is the file : https://www.dropbox.com/s/xmv77kh8ks49src/PINBALLSKETCHTEMPLATE.psd?dl=0
Now go make something rad!
*This is for sketching purposes only, when you're ready to move past this stage into CAD, you'll have a rough sketch to work from!
*Stern play-field, but the difference in Stern vs Williams play-field sizes is a non issue at this phase being such a small one.
Screenshot (131) (resized).pngScreenshot (132) (resized).pngScreenshot (133) (resized).pngQuoted from BorgDog:Cool, thanks jack!
Now make us a fusion 360 version with accurate 3d models of all the parts in it
I mean... I'd love that as well. lol
Quoted from UnholySpectacle:Loved the Friday stream. I will always remember the random trumpet solo in dark silhouette.
Haha oh god.
Promoted items from Pinside Marketplace and Pinside Shops!
Reply
Wanna join the discussion? Please sign in to reply to this topic.
Hey there! Welcome to Pinside!
Donate to PinsideGreat to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
