Guns N' Roses
Data East, 1994My GnR keeps blowing the f9 fuse for the lazer kick.
the only components in this cirquit really only are Q2 (tip 36c) , D21 (diode), R18 and Q25 (TIP122).
and ofcourse the 23-800 coil and diode.
replaced the q2 and coil/diode on impulse but no improvement, i cant really measure any faults in any of the components either, any thoughts? a short somewhere in the wiring?
wiring is good, diode on the coil is good too.
i guess ill check the magnets next. is there a test you can do for checking the condition of the actual magnets?
Quoted from mozach:That fuse can also blow if something is bad with the magnets. I’d pull the magnet fuses and replace the F9 fuse and see if it blows.
I didn't think of the magnets as they are not in the standard manual.
Here is the addendum file:
https://www.ipdb.org/files/1100/Data_East_1994_Guns_N_Roses_English_Manual_Addendum_and_Revised_Page_31.pdf
It indeed shows the magnets being supplied via PPB J7-3, which is also used for the Laser Kick.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/de-gnr-blowing-fuse-f9-lazer-kick and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Piershil
Peachtree City, GA
Sjælland