You're currently viewing posts by Pinsider ksuwildcatfan.
Click here to go back to viewing the entire thread.
The 0.5A fuse was blown and when I replaced it TR3 GLOWED and then the fuse blew. Not sure what this tells me, if anything..
Thanks Chad I'll check into that. Two questions:
Are there any reasonable power board replacement options? The guy I usually have do my board work is.... Overwhelmed.
Is there any way, less of plugging it into another DE game which I don't have, to test and see if the DMD itself is good? My seller told me to let him know if it ended up needing replaced and he'd get it done. But if it's good I don't want to even mention it.
Quoted from Phbooms:Looks like some of your insert light are out also. Top of the wire harness area at CN8 looks burnt on your board and the wire harness wires look wrong compared to mine. I have a wire on that top pin . I think if you buy the board Chad recommended you will be good to go there and fix that harness to have the correct wiring. I actually just replaced the same board myself.
Also you should be able to take your dmd out of another Stern in your collection and pull the board off and swap the dmd to try in another machine. I just did this with a Austin Powers DMD from a LW3 but thats whitestar to DE and your going whitestar to SAM so Im not 100% sure on that.
Inserts are good on it, they were just off in that particular pic as he was playing for some reason.
The board definitely has issues and either needs fixed or replaced, I just don't know if the dmd also has problems. There's no way the dmd could cause a new or repaired power board to present new issues? I'm fine with dealing with one issue and moving to the next, just want to make sure I don't spend money and then immediately break what I replace because I didn't do my due diligence in verifying something.
Quoted from KSUWildcatFan:Inserts are good on it, they were just off in that particular pic as he was playing for some reason.
The board definitely has issues and either needs fixed or replaced, I just don't know if the dmd also has problems. There's no way the dmd could cause a new or repaired power board to present new issues? I'm fine with dealing with one issue and moving to the next, just want to make sure I don't spend money and then immediately break what I replace because I didn't do my due diligence in verifying something.
Buying a PIN2DMD and hoping that fixes my issues. If the only section of the power supply with issues is the DMD portion then an LED display should be fine...I hope. Game plays great otherwise.
Bottom portion (the easy part!) is looking good. Still a lot of work to do.
I don't suppose anyone has any of the pieces shown in the latter pics--they don't need to be perfect. Discards from a replacement, etc, would be just fine. I'm referencing specifically the rear left plastic, the helicopter plastic, one target sticker (maybe someone bought a set and didn't need them all?), and the mirror.
PXL_20210502_223555902 (resized).jpgPXL_20210503_153526433 (resized).jpgPXL_20210503_154057199 (resized).jpgPXL_20210503_154212460 (resized).jpgPXL_20210503_154232470 (resized).jpg
PXL_20210503_154113778 (resized).jpgHa, I figured it out shortly after making that post. I thought I got it deleted but I guess not.
As you said, kinda need the controller board plugged in..... Lol
Project complete! Only two things left really: replace the one missing drop sticker and secure the DMD a bit better (going to use the mounts from the speakers and some metal brackets... ALL of my dmd mounts are broken, ugh!). Then it's time to move on to a new home now that it's nice and clean.
PXL_20210512_215811091.MP (resized).jpgPXL_20210512_215820326.MP (resized).jpgPXL_20210512_231847949.MP (resized).jpgPXL_20210512_231851978.MP (resized).jpgQuoted from prl867:I traded mine away a few days ago for a Dr. Dude (I added some cash).
I kinda miss it. It’s a very fun and underrated game. I’ll probably own one again eventually.
What Leo wants.......
Oh man I'd take LW3 over dude every time. I love the simple cheesy fun factor of lw3, I think I'll miss this one too. Alas, only room for 7 and black knight sword of rage comes next week.... It is what it is. I'm just happy to have made one breathe again.
You're currently viewing posts by Pinsider ksuwildcatfan.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/dataeast-leathal-weapon-3-lw3-club-join-if-you-have-one-or-haf-one?tu=ksuwildcatfan and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.