Hope someone can help we were missing the drop target motor for our star wars de, we have bought a new one but i am not sure on how to wire it up also in photos there is a cap which we didnt receive can anyone help
thx

Thx this is fantastic great help , is the cap a necessary part what damage is done without cap?

Our local store only has a 50 volt cap will this do or do i need 500 volts
otherwise its about a 2 week wait

out hole ball return problem
hi can anyone please take a photo of the wiring to the outhole solenoid i put in a new one and i wired it the same as it came out worked for a day then stopped i checked everything, when i compared the old with new the diode was different way around.
spoke to a techi he said as it was a stern coil swap the wires around as green should be on the banded end as i think was the original.
did that and poof tip and fuse blew , i suppose maybe the diode was gone as well anyway i need help
first photo is the new one that stopped working and 2 is the old one

IMG_1864 (resized).JPG

IMG_1865 (resized).JPG

Thx for that so I had it wired right but when I check other solenoids they are wired opposite

Hi guys I need a photo of the adjustment switches wiring I can’t get into settings to check switches I want to check some switches but doesn’t matter if the switch is up or down so I probably will have to replace it but o want check first to see if it’s wired properly first