Looking for some assistance. First let me admit, I might be over my head here, so please forgive the igonorance. I took in a DE Star Wars, I am about 90% done with the shop job (new coils, drop targets, new lighting and motors etc). I put in a new PSU and PPB board and did my first attempt at rebuilding the connectors since they were burnt. On the PPB board connector J5 on pin 6 there were two yellow and white wires on this connector. I am having little to no luck with the GI working on the machine. There are so many hacks on the wiring on this old routed machine, I am trying to make it right. Can anyone confirm there should be two wires on this connector? I feel like I am running down a rabbit hole on this one. Since I have seen it come to life for brief moments, I assume it's some sort of connection issue. Any direction would be greatly appreciated!