Hi, I need help with a question with my star wars data east.
Sometimes all the coils have more strength and other times all the coils have less strength and I can not find out what this problem is.
the difference is very little, but it is notorious.
I wanted to consult them if any of this happened to him and if they know what is due.
I discard power supply problem, I already have a new rottendog
I tried to increase the pulse of the strength of the coils through the configuration of the pinball but I have not noticed any difference
Any suggestions?

Thank you

I realized that when I turned on equipment with high electrical consumption the pinball worked slower without force.
I think I solve it. I had configured the jumper 230 in the entrance of the transformer and in my country it is 220v.
the input voltage fluctuates between 210 to 220
for now it works well and without power changes in the coil.
Very useful this diagram that I found, because the one in the manual did not understand it.

thanks

tranplug (resized).png

Hello, I have some consultations where you can buy that led strip? do you connect it to the gi lights? is 6v the led? Thank you