Star Wars
Data East, 1992You're currently viewing posts by Pinsider drummermike.
Click here to go back to viewing the entire thread.
Quoted from Dkjimbo:Anyone have a source for the yellow standard standup targets of the scoop cliffy? Marco is out of stock on both of those items and I can't seem to find any at any other vendor.
Thanks!
I have an extra 2 bank 500-5615-06 target. They are clear not yellow. I put it new yellow targets thinking they were bad but the pin just had loose wires in the back box. You can have them. PM me with your address.
Quoted from wolfemaaan:Ok, anybody know where this plastic goes?[quoted image]
My SW does not have it.
Quoted from wolfemaaan:So I finally got my legs back on my Star Wars, wow this Pin is tall AF! Does everybody’s measure 78” to the top of head? My KISS is only 71”. Seems almost too high but I have the stock/standard 28” legs on
Mine is 77.25". But I replaced the ugly rusted DE legs with Williams style legs. They are 28.5". I have the levelers out 1.75"s in the back to get the 77.25" height. Replaced the legs on LAH with the Williams also.
Quoted from DavidC:[quoted image][quoted image][quoted image][quoted image]
The black cabinet looks great. Much better than the blue.
Quoted from Pahuffman:Wow I had no idea there was a little dome that covers the back of that assembly. Mine doesn't have one. I just used a flex bulb and pointed it directly into the insert to avoid light leaking. Does anybody have a spare dome?
That plastic cover is very flexible. The flex bulb is a good idea.
Quoted from Shenanigander:I'm wondering the proper location for this clear plastic. The photo shows where it was located on mine originally but I don't feel that that is correct but I could be wrong.
[quoted image]
I think that is correct but it should be turned on an angle to go under the wire form. It is to prevent a ball trap. Mine is missing. I remember I did have a ball stuck there behind Jabba. Never knew about this plastic! There are 2 others on the other side of the playfield.
I think the back piece you are missing is to stop the light from reflecting backwards. A flex bulb will probably stop that though.
Quoted from SLCpunk2113:Hey everyone. I'm doing my best to bring a very heavily routed Star Wars back to life. I luckily found a place to buy a brand new plastic set (most of mine are completely trashed). I started replacing things today when I quickly realized that there are little metal brackets everywhere that I'm going to need to either replace or reuse. Best practices for the reuse idea? Best place to order for the replace plan? I am missing the bracket that holds up the clear plastic behind Jabba the Hutt so at the very least I will be replacing that one. Would someone do me a solid and take some pics of how that clear plastic behind Jabba mounts. Thanks!
Look at post 2943.
Is it normal for the ball launch button to have a slight delay before ejecting the ball after it is pushed?
Quoted from allsportdvd:Hi all
Does anyone have a picture of what it looks like behind the jabba’s Bounty plastic? Mine is missing a bracket of some kind I think
See post 2927.
I am now selling my DESW. Local pickup only. Easy access. $4000 firm. Thanks.
20190810_153443 (resized).jpg20190810_153450 (resized).jpg20190810_153454 (resized).jpg20190810_153458 (resized).jpg20190810_153503 (resized).jpg20190810_153524 (resized).jpg20190810_153536 (resized).jpg20190811_220548 (resized).jpg20190811_220601 (resized).jpg20190811_220607 (resized).jpg20190811_220618 (resized).jpg20190811_220658 (resized).jpgQuoted from wolfemaaan:That machine looks like its holding the ceiling up
Yes. It should be higher to get the right angle. I sold it on Sunday.
Replaced it with TSPP.
You're currently viewing posts by Pinsider drummermike.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/data-east-star-wars-clubmembers-fans-welcome?tu=drummermike and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Bethlehem, PA
