Quoted from Seth1977:More work after work today. As the pictures show the lights are installed and it works! Lots of fun building a model from scratch without directions. So with that said, these take time to print and it’s messy because it’s UV cured liquid. I have a spread sheet and keeping track with interested pinheads. All I ask is that you understand this is a raw kit I am putting together, and it’s up to your imagination and my pictures to help guide you. I will be making 7 kits to ship out. I would also love to share my files I created for you to print.
Now I need your help. I need two stronger springs for each side due to the droid being heavier now. Lol. Any ideas please feel free to post. I will look on Amazon.
As for the lights. The stock lights I screwed inside body. Pretty easy, just don’t drill all the way through and try not to crack. The white holo projectors and the red/blue light I will run them directly to general illumination. I have already soldered resistors so they can be hooked up to 6-12v
[quoted image][quoted image][quoted image][quoted image]
Hot damn, Seth. That looks dope!