Official member since today

Rough cabinet but looks like the playfield will be OK after cleaning (wasn’t cleaned for over 10 yrs)

69BF8448-1A3A-4980-8F07-C01DBBD14FE1 (resized).jpeg

801D4F85-2C5F-414C-885E-BA5847226A6C (resized).jpeg

0E5089CB-57A3-4BD8-AF87-DD99EB52C51F (resized).jpeg

A3AEE7A6-A09E-4ECB-BB18-658FAA40C614 (resized).jpeg

DD94EA6A-FAC9-402D-9856-D591376C17FC (resized).jpeg

9E51CB88-F1CE-4210-A307-DB340FF93F9F (resized).jpeg

10DC973E-6BEC-4E8F-9E13-995B58EB0165 (resized).jpeg

Work in progress

GI fully functional again. Has a stuck coil en replaced transistor which is now OK but also coil has to be replaced. To low resistance and blows now fuse. And replaced a lot of the fuse holders.

36EFB6E5-CCCA-49D2-B4ED-2F16246671E0 (resized).jpeg

Had the ramp professional TIG welded. Almost invisible

478880A2-1FC8-42DC-8781-EEBB3ED4CEF2 (resized).jpeg

57CBEBAD-C7D2-4F76-8A37-C2F39EF5A269 (resized).jpeg

9F1D7244-E9EC-49D8-A9C0-749AA19131F1 (resized).jpeg

So have my SW up and running and yesterday evening first few hours of playing on it. It runs on chad 107 code. There is more going on in the code and on the playfield as I upfront expected

Set up a score of approx 450M, 4 balls, no extra balls

Need to tweak some light and some small stuff but rest is all OK

Only the shot to the dead star. That is a tricky one as it can give you a stdm. Is this normal or is my pin not set up right? Think it’s like 10%? Also I do see sometimes airballs. Not a big issue but they are there. Any comments on this from you guys?

F0B15EEA-4587-48F5-A523-34F7A281DF45 (resized).jpeg

Thanks for the advise but foam is already replaced. The target itself is also new. When replacing it I found that the top side of the target hit the top of the bracket it is mounted on and thus couldn’t move freely. So lowered the target by just a tiny bit and dremmeled away a tiny bit on the droptarget itself.