Yeah, that's no good. Shoot me a pic of what you're missing, and I might be able to help.

That was me. The effort kind of stalled out, though.

I'll be starting a restore on mine soon. How bad yours? Mine just needs inserts set and a clear coat with very minor spot touchups. I would consider doing yours with mine but not sure if canada shipping might be an issue. Ive only seen 1 on ebay. $900 if i recall. It was nos.

Dan

Buy them from pinsider ChadH directly in my opinion. ChadH developed them, he should get the $ from the sale of them.

On the 3d printer as we speak!

I've had upgraded pyle speakers in there for some time, but this spacer is needed to put the grills back on.

IMG_4887 (Large).JPG

IMG_4888 (Large).JPG

pl42bl, 4 ohm. http://www.amazon.com/Pyle-PL42BL-180-Watt-Two-Way-Speakers/dp/B000230LBI

I can make a variation of this that allows a gap for leds once I get the size and test fit correct. More to come.

Dan

Edit: pic of test fit attached. I pulled this off the printer about 1/3 of the way through the job to make sure it would be a good fit. It is, so moving forward with making 2 at full thickness. They need to be about an inch thick in order to set the tweeter assembly back far enough so you can't see it behind the grill.

IMG_4899 (Large).JPG

Hey Paul. The spacer sits behind the speakers like so. So basically it allows you to have full range speakers without being able to tell they are different than stock. I think for an led version you'd exclude cylinder-shaped holes in the sides of the spaces at about a 50-60 degree angle and shine the lights away from the player, towards the speaker. That would allow some light to glow through the death star. Might look like crap, but might be cool. Not sure, really.

Dan

IMG_4900 (Large).JPG
IMG_4901 (Large).JPG

That upgrade rocks my basement. I also upgraded the woofer. Parts Express....

GRS 8PR-8 8" Poly Cone Rubber Surround Woofer
Part # 292-428

80 Hz Low Pass 8 Ohm Crossover
Part # 266-442

Thanks for posting, and very glad they fit

That woofer I posted above is installed in 2 of my dataeast pins and 3 pins total. There's a pretty good writeup of my updating Robocop. A pic of the woofer and x-over in post #4.

https://pinside.com/pinball/forum/topic/robocop-50-60-sound-mod-begins-a-little-help

When you get the car speakers in the head and this woofer, you really rock the house. Dataeast pins have great sound, and this setup doesn't disappoint when it comes to showing off that great sound. And the price is right, of course, which is awesome.

I'd guess that an external sub under the pin would just about shake plaster off the walls!!! If you like that kind of thing

Dan

Out of the club, will miss it but it's sold to another pinsider, hopefully he'll join here.

Dan

Do you have a meter? Most likely it just broke at the solder point, but it's always good to test for voltage in test mode.

Dan