Data East Star Wars Club...Members & Fans Welcome.

(Topic ID: 72482)

Data East Star Wars Club...Members & Fans Welcome.


By MustangPaul

4 years ago



Topic Stats

  • 2,768 posts
  • 260 Pinsiders participating
  • Latest reply 2 days ago by Mikonos
  • Topic is favorited by 119 Pinsiders

You

Linked Games

Topic Gallery

There have been 811 images uploaded to this topic. (View topic image gallery).

IMG_5829 (resized).JPG
57477BE0-379C-4DB9-85E6-7AD40A4185F0 (resized).jpeg
C860756E-F320-4EBA-9F10-C5626AAF551C (resized).jpeg
IMG_20181108_193213 (resized).jpg
IMG_20181108_201436 (resized).jpg
IMG_20181108_210443 (resized).jpg
IMG_20181108_202654 (resized).jpg
IMG_20181108_210501_01 (resized).jpg
IMG_20181031_120819 (resized).jpg
IMG_20181031_104336 (resized).jpg
pinball (resized).jpg
pinball1 (resized).jpg
IMG_6184 (resized).jpg
65A44F8D-E6CF-473C-B1CA-66BD42F91BD2 (resized).jpeg
A0EA1972-CB6C-442A-8C6B-F5E7A7C300CC (resized).jpeg
C4A451DE-48BF-4254-AC7C-E5797773F6BE (resized).jpeg

There are 2768 posts in this topic. You are on page 56 of 56.
#2751 37 days ago

Here's mine!

pinball (resized).jpgpinball1 (resized).jpg
#2752 35 days ago
Quoted from freshjive:

Here's mine!
[quoted image][quoted image]

Looking very bright! Well done

#2753 34 days ago

Anyone install the sideboard decals from Ministry of Pinball? They look really cool and match the games artwork.

#2754 33 days ago
Quoted from shepP:

Anyone install the sideboard decals from Ministry of Pinball? They look really cool and match the games artwork.

I have a set, but have yet to install them.

1 week later
#2755 24 days ago

Does anyone make ball eject protectors for sw? I couldn't find any apart from the normal hole protectors from cliffy.

1 week later
#2756 18 days ago

Hi! I would like to show my recently changed power connector with new, equivalent molex parts. Old one provoked some random resets and got insanely hot.

I'll leave here the molex references I used, may be useful for any of you someday:

03-09-1126
03-09-2121
02-09-2134
02-09-1134
02-09-1104
02-09-2103

IMG_20181031_104336 (resized).jpgIMG_20181031_120819 (resized).jpg
1 week later
#2757 9 days ago

Joined the club last night! Can someone please email me the 1.07 code so I can have it flashed to a ROM? Filthy but working 100%!

IMG_20181108_193213 (resized).jpg
IMG_20181108_201436 (resized).jpg
IMG_20181108_210443 (resized).jpg
IMG_20181108_210501_01 (resized).jpg
IMG_20181108_202654 (resized).jpg

#2758 9 days ago

Flipper power question. Is the Grey and Blue wires the high power (50v) and the Orange low power or visa versa?

57477BE0-379C-4DB9-85E6-7AD40A4185F0 (resized).jpegC860756E-F320-4EBA-9F10-C5626AAF551C (resized).jpeg
#2759 5 days ago

Can somebody post a pic of their flipper coil setup? I keep hearing some people have EOS but DESW doesn't appear to have these at all. It appears the Orange/Violet (Right Flipper) and Orange/Grey (Left Flipper) are low voltage from CPU Board CN 19-1 (Right) & 19-2 (Left). And the Blue-Yellow (Right Flipper) and Grey-Yellow (Left Flipper) are High voltage from Solid State P.S. BD CN 2-4 (Right), 5 and CN 2-1, 2 (Left). There also doesn't seem to be a ground anywhere on the flipper coil/assembly. Just wanted to be sure this matches up with everyone else here.

I'm still getting weak flipper response/flipper hold and once I verify this, going to measure the power off each connector

IMG_5829 (resized).JPG
#2760 5 days ago
Quoted from wolfemaaan:

Can somebody post a pic of their flipper coil setup? I keep hearing some people have EOS but DESW doesn't appear to have these at all. It appears the Orange/Violet (Right Flipper) and Orange/Grey (Left Flipper) are low voltage from CPU Board CN 19-1 (Right) & 19-2 (Left). And the Blue-Yellow (Right Flipper) and Grey-Yellow (Left Flipper) are High voltage from Solid State P.S. BD CN 2-4 (Right), 5 and CN 2-1, 2 (Left). There also doesn't seem to be a ground anywhere on the flipper coil/assembly. Just wanted to be sure this matches up with everyone else here.
I'm still getting weak flipper response/flipper hold and once I verify this, going to measure the power off each connector[quoted image]

No EOS, everything is controlled by the Solid State Flipper board in the lower right hand side of the cabinet. Blue/Yel and Grey/Yel is the power coming from the board, 50v for initial flip, 8v for hold.

There is a lot more information about this in the Lethal Weapon 3 manual than there is in the Star Wars manual.

#2761 5 days ago
Quoted from cabuford:

No EOS, everything is controlled by the Solid State Flipper board in the lower right hand side of the cabinet. Blue/Yel and Grey/Yel is the power coming from the board, 50v for initial flip, 8v for hold.
There is a lot more information about this in the Lethal Weapon 3 manual than there is in the Star Wars manual.

Ok, thanks for the info. The coils get pretty hot and flippers seem to get weaker as that occurs. Will need to dig deeper to see why this issue is occurring

#2762 5 days ago

Anyone know if there is a setting to auto-launch the ball after a certain amount of time? I have desw in my waiting room and when kids leave it mid-game it keeps making the tie fighter whooshing sound over and over.

#2763 4 days ago
Quoted from paynemic:

Anyone know if there is a setting to auto-launch the ball after a certain amount of time? I have desw in my waiting room and when kids leave it mid-game it keeps making the tie fighter whooshing sound over and over.

You just need an app that sends your kids an alert every 2 minutes "Shut The Mutha FN Machine Off NOWWWW!!!"

#2765 4 days ago
Quoted from Pahuffman:

Joined the club last night! Can someone please email me the 1.07 code so I can have it flashed to a ROM? Filthy but working 100%!

Congrats on the new purchase!
If you're looking to download the code and burn it yourself, it's at pinballcode.com
If you don't have a burner, I can help.

#2766 2 days ago

Hey gang. New pin owner. Having a Star Wars Power issue. Replaced the power board and have now discovered it's and issue at the fuse down in the volume control box. It's finicky and had to be twisted in just right for the machine to power on. It has since gotten extremely worse. The bottom of the fuse holder will literally catch on fire if turned on. Holy he'll. What do I do?

#2767 2 days ago

djy2j - Welcome to the club! I saw the answers on the DE club thread - do what they say there. Avoid a catastrophe, and enjoy that pin!! Have had my SW for over 20 years.

#2768 2 days ago

Joined to this club!

I post a good play I did some years ago:

I did all but Jackpot.

Total Points: 170.519.510

I hope you like!

Regards

Promoted items from the Pinside Marketplace
$ 40.00
Lighting - Other
Rock Custom Pinball
Trade
Machine - For Trade
Lynnwood, WASHINGTON
$ 79.99
Playfield - Toys/Add-ons
Lighted Pinball Mods
$ 20.00
Playfield - Decals
Metal-Mods
From: $ 369.95
Boards
PinSound
From: $ 40.00
Lighting - Interactive
Professor Pinball
$ 30.00
Electronics
Yorktown Parts and Equip
$ 14.95
Playfield - Toys/Add-ons
ULEKstore
From: $ 16.95
Wanted
Machine - Wanted
Ballston Spa, NY
$ 79.99
Playfield - Toys/Add-ons
Lighted Pinball Mods
$ 9.99
Eproms
Matt's Basement Arcade
There are 2768 posts in this topic. You are on page 56 of 56.

Hey there! Got a moment?

Great to see you're enjoying Pinside! Did you know Pinside is able to run thanks to donations from our visitors? Please donate to Pinside, support the site and get anext to your username to show for it! Donate to Pinside