Star Wars
Data East, 1992You're currently viewing posts by Pinsider jgadzia.
Click here to go back to viewing the entire thread.
Refurbing my Data East Star Wars and found that the woofer was not a woofer but a crappy mid-range speaker. I recently upgraded my Woofer on my TZ following this guide:
http://www.dziedzic.us/wpc_speaker_replacement.html
But this guide doesnt apply to the Data East. It seems that each speaker has its own amplifier. So my questions:
1. Do I need a crossover on the woofer?
2. Do i need an LPAD, if so how should i hook it up?
Quoted from Rdoyle1978:DE speakers are 4ohm if I’m not mistaken.
The boards put out good sound to the backbox speakers generally, so I wouldn’t worry about replacing them.
The L-PAD is a good idea, because you can’t dial in each speaker individually otherwise. Crossover also a very good idea but not required
FWIW the PinballPro/FF/PinSound solutions aren’t that expensive and are direct replacements. PinSound board takes the game to another whole level
according to this post it is an 8 ohm woofer and they used an 8 ohm crossover.
https://pinside.com/pinball/forum/topic/data-east-star-wars-clubmembers-fans-welcome/page/18#post-2347878
would i need two LPADs one for the mid range and the tweeter? If i can use 2 how would i wire them?
Quoted from Billy16:For whatever it is worth I upgraded my TFTC speakers to FF. There was a very minor sound improvement unlike on most other pins I've used FF's on. The cab speaker might be worth improving, but I'm with Rd1978--the standard backbox speakers are evidently pretty good.
yes i am not going to mess with the backbox speakers just the woofer. But if i need to add an LPAD to make the bass kick, not sure how to do it via the wiring?
You're currently viewing posts by Pinsider jgadzia.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/data-east-speaker-upgrade?tu=jgadzia and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Lawrence, KS