Adventures of Rocky and Bullwinkle and Friends, The
Data East, 1993
Batman
Data East, 1991
Jurassic Park
Data East, 1993
Last Action Hero
Data East, 1993
Lethal Weapon 3
Data East, 1992
Maverick
Data East, 1994
Phantom of the Opera
Data East, 1990
Playboy 35th Anniversary
Data East, 1989You're currently viewing posts by Pinsider mjw.
Click here to go back to viewing the entire thread.
Quoted from Kennebunk:Does anyone have a current link to the power supply you are using. Can't seem to find the $15 variety. Found this one at mouser for $42.
https://www.mouser.com/ProductDetail/Artesyn-Embedded-Technologies/LPT42/?qs=sGAEpiMZZMsPs3th5F8koC2sObuvShnMftt3EqbU9U4%3d
How do you wire an external power supply into a game? Do you spice in to the 120v and then create a connector coming out to supply 12 volts? Please advise.
Quoted from wayout440:Read post #260 and #262
Will do . Thanks
Quoted from wayout440:Read post #260 and #262
So I think I get it . You attach a wire to the white and then a wire to the black after the power switch . Those wires then get attached to LN (ac) on power supply. Do you run a separate ground to the connecctor to the right of LN that has the ground symbol? V2 is 12 volts out on this unit.
Quoted from wayout440:You don't have to, but it's a good idea. Run wire from ground symbol to ground braid on your machine. That will make the case of the power supply safer if something should short AC to it's chassis.
Ok thanks Wayou!!!! Going to try this on a GNR for a color DMD. I checked schematic and it has a bill collector same as maverick
So I might just use that for 120 volt power to the power supply.
Quoted from Bendit:+1 especially if the molex converter is included (so you don't have to splice anything).
Me too. That would be a nice ready to go kit.
You're currently viewing posts by Pinsider mjw.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/data-east-speaker-noise-ideas-for-a-cure?tu=mjw and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Mckeesport, PA