Guys in theory would a PINSOUND with new speakers and wires solve this issue/ I'm having it in my JP and the right speaker is humming pretty loud, the right is quiet. Expensive fix yes but ive been eyeing this for awhile.

Thanks guys!! I'm going to order one today

Ok I just put my pinsound in and that loud humming from the right speakers is gone!!!! It sounds amazing and I still need to install my Flipper Fidelity speaker kit next. I'm not even getting any low noise when the lights are cycling in attract mode anymore either Worth the money just to get rid of it!

So after putting many, many mods in my Jurassic Park I pinned down the hum and eliminated it. Long story short I added a power brick to Power my mods/colorDMD/topper, with the main power not straining the hum was eliminated. If I plug in just one mod id get a low hum, each item plugged in it got louder and eventually the sound would cut off. So pulling all the power off of it solved the problem. I used this power adapter https://www.amazon.com/SATA-Adapter-Cable-Power-Cord/dp/B001OOT804
Plugged into a 4 pin molex to 3 pin molex from Pinball Life https://www.pinballlife.com/index.php?p=product&id=1802
Then ran that to a 8 way splitter from pinball life https://www.pinballlife.com/index.php?p=product&id=4234

Then added a secondary power strip inside the cabinet and plugged it into the wall. Tying it into the main power inside the cabinet could be done possibly but I can live with a 2nd cord coming out of the back of my machine for now.