(Topic ID: 99508)

Data East - Sound Volume Issue (Rocky and Bullwinkle)

By burnt_finger

9 years ago



Topic Stats

  • 8 posts
  • 7 Pinsiders participating
  • Latest reply 1 year ago by atarijim
  • No one calls this topic a favorite

You

#1 9 years ago

I hate sound issues, I rarely if ever have any so I am going to ask for some help. The pinball is the Data East Rocky And Bullwinkle the problem is the volume is at ear splitting levels even with the volume potentiometer turned all the way down.

I have verified the pot is still good and also replaced it with a new 10k just to make sure I was reading it correctly and I get the same results. I have also changed the adjustment setting 43 – Background Volume and set that to 25% and that works leaving the speech still at ear splitting levels.

So at this point I am just looking for some advice on where to start as I don’t want to just start shot gunning this thing

Thanks in advance

#2 9 years ago

Night Bump

#3 9 years ago

start with the caps, after that the preamps, then the amps.

4 years later
#4 5 years ago

Having the same issue on a LW3 right any word on a fix?

6 months later
#5 4 years ago

Bump. Same issue on lethal weapon 3 here also! Any help greatly appreciated!

8 months later
#6 3 years ago

Did any of you figure this issue out?

*edit* well today I found out that 10 turn pots aren't wired the same way.

2 years later
#7 1 year ago

Same issue with a RAB, pot test ok but volume is insane with the pot turned all the way down. Any suggestions?

#8 1 year ago

TDA 8199 U35 8 pin IC amp and volume control would be my first suspect.

aj

Promoted items from Pinside Marketplace and Pinside Shops!
$ 32.00
Electronics
Yorktown Arcade Supply
 
From: $ 64.95
Cabinet - Sound/Speakers
PinSound
 
$ 12.00
Playfield - Toys/Add-ons
UpKick Pinball
 
$ 69.99
Playfield - Toys/Add-ons
Daddio's 3D Printed Mods
 
$ 18.00
From: $ 110.00
Playfield - Other
Arcade Upkeep
 
From: $ 9.99
$ 29.50
From: $ 10.00
Playfield - Protection
UpKick Pinball
 
From: $ 0.99
Playfield - Toys/Add-ons
Daddio's 3D Printed Mods
 
$ 35.00
Hardware
Filament Printing
 
3,900 (OBO)
$ 27.95
$ 65.00
Boards
Pinball Haus
 
$ 49.95
Lighting - Led
Mitchell Lighting
 
$ 14.95
Playfield - Toys/Add-ons
ULEKstore
 
From: $ 5.99
Playfield - Plastics
The Pinball Scientist
 
$ 30.00
Playfield - Other
Filament Printing
 
$ 79.99
Cabinet - Armor And Blades
PinGraffix Pinside Shop
 
$ 18.00
Playfield - Plastics
Pinball Haus
 
$ 30.00
Playfield - Other
YouBentMyWookie
 
From: $ 40.00
Lighting - Interactive
Professor Pinball
 

Reply

Wanna join the discussion? Please sign in to reply to this topic.

Hey there! Welcome to Pinside!

Donate to Pinside

Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!


This page was printed from https://pinside.com/pinball/forum/topic/data-east-sound-volume-issue-rocky-and-bullwinkle and we tried optimising it for printing. Some page elements may have been deliberately hidden.

Scan the QR code on the left to jump to the URL this document was printed from.