Nice, I need to get back to mine.

Here's what was left of my spring, assumed to be original with the hook end under the screw.

Screenshot_20200306-123646 (resized).png

Hi all, does your machine have these lane divider posts?

IMG_20210228_221834590~2_resize_23 (resized).jpg

Trying to figure out if they are original or not. I feel like they've been added. I have one on each side. The playfield diagram does not show them, but can't really go by that since it's not exactly accurate. It also doesn't show the bumper between flippers. IPDB photos appear to show holes on both sides but no post. The playfield diagram in my book appears to show a mark for it on the right but not on the left, and no number.

Oh interesting, so jardine you have a nail and Pahuffman has nothing. Interesting. Looking at pics on the forum it appears there may have originally been dimples there, maybe operator's choice to place something there?

I wish I would've known those posts weren't original before I finished the restoration...

That makes a lot of sense, thanks for the input. I'll probably leave them off for now and see how it plays. I guess it's not too bad to have the holes. I was thinking they'd be asking for damage with the ball traveling over them but no more than a rollover slot I suppose.

Since this playfield had been worked over before, (including half a dozen drywall screws in various locations I had to fill and repair) I don't trust much that was on the playfield when I got it.

So what does everyone have for this post? The playfield diagram calls for the "standoff with groove" that I have my finger on, but most pics I see have the "bumper post with threaded top" shown lying down.

IMG_20210301_184225740_HDR~2_resize_66 (resized).jpg

Looks like pretty decent shape, all plastics intact is a good start.

Agreed, $750 is a steal. Your plastics look in good shape too. Mine were thoroughly destroyed or altogether missing and I paid twice that.

Thanks. Mine is missing too. Someone added an upgraded sound system at some point and then removed it.

Does anyone know the difference in rom codes? A02-6 vs A02-7? Or where to find this information?

Same. I found a menu setting to adjust the solenoid strength but I don't think it affected the flippers.

Can you share the dimensions of your tube? Mine is missing. Someone replaced my speaker with a big subwoofer and it must've been in the way.